84A, 84MA Dial Bore Gages 1-1/2 – 12-1/8"/38-317.5MM These fractional bore gages allow for bore measurements beyond the size range of our 82 Bore Gage. They are comparison gages and should be set with a master ring gage, gage blocks with parallel jaws, outside micrometers or vernier calipers. Ring gages are available by request, quoted by application. Good practice is to set the gage to zero, as near to the desired dimension as possible. Gages are well balanced, easy to use and have the following features: • Can be easily held to inspect bores and hole sizes without removing the workpiece • An adjustable range screw and two centralizing plungers provide accurate, three-point contact for tool alignment in larger bores • All contacts and centralized plungers are hardened tool steel for wear and spring-loaded for sensitivity • The housing and knurled handle are aluminum for light weight and good balance • Dial indicators have jewel bearings for sensitivity • Bore depths are also available up to 12" (300mm) in 1" (25mm) increments on special order • Furnished in finished wood case • Available with longer reach lengths,carbide contacts or electronic indicators with output capability from our special order division Dial Bore Gages 84AZ-111-5 84MAZ-161-6 84A Dial Bore Gages (1-1/2 - 12-1/2" Range) Cat. No. EDP Total Range with Extension Ext. Range Each Extension (inches) Max. Bore Depth Plunger Travel Indicator Grad. 84AZ-111-4J 00026 1-1/2-3" 12 1.500-1.625", 1.625-1.750", 1.750-1.875", 1.875-2.000", 2.000-2.125", 2.125-2.250", 2.250-2.375", 2.375-2.500", 2.500-2.625", 2.625-2.750", 2.750-2.875", 2.875-3.000" 3" .020" .0001" 84AZ-134-4J 00030 .0005" 84AZ-111-5J 00027 3-5-1/16" 11 3.000-3.187", 3.187-3.375", 3.375-3.562", 3.562-3.750", 3.750-3.937", 3.937- 4.125", 4.150-4.312", 4.312-4.500", 4.500-4.687", 4.687-4.875", 4.875-5.062" 6" .030" .0001" 84AZ-134-5J 00031 .0005" 84AZ-111-6J 00028 5-8" 4 5.000-5.750", 5.750-6.500", 6.500-7.250", 7.250-8.000" 6" .030" .0001" 84AZ-134-6J 00032 .0005" 84AZ-111-7J 00029 8-12-1/2" 3 8.000-9.500", 9.500-11.000", 11.000-12.500" 7" .030" .0001" 84AZ-134-7J 00033 .0005" 84MA Dial Bore Gages (38.1 - 317.5mm Range) Catalog No. EDP Total Range with Extension Ext. Range Each Extension (mm) Max. Bore Depth Plunger Travel Indicator Grad. 84MAZ-161-4J 00034 3.175-76.2mm 12 38.1-41.28mm, 41.28-44.45mm, 44.45-47.62mm, 47.62-50.8mm, 50.8 -53.98mm, 53.98-57.15mm, 57.15-60.32mm, 60.32-63.5mm, 63.5-66.68mm, 66.68-69.85mm, 69.85-73.02mm, 73.02-76.2mm 75mm 0.51mm 0.002 mm 84MAZ-181-4J 00038 0.01 mm 84MAZ-161-5J 00035 76.2-128.58mm 11 76.2-80.96mm, 80.96-85.72mm, 85.72-90.49mm, 90.49-95.25mm, 95.25-100.01mm, 100.01-104.78mm, 104.78-109.54mm, 109.54- 114.3mm, 114.3-119.06mm, 119.06- 123.82mm, 123.82-128.58mm 150mm 0.76mm 0.002 mm 84MAZ-181-5J 00039 0.01 mm 84MAZ-161-6J 00036 127-203.2mm 4 127-146.05mm, 146.05-165.1mm, 165.1-184.15mm, 184.15-203.2mm 150mm 0.76mm 0.002 mm 84MAZ-181-6J 00040 0.01 mm 84MAZ-161-7J 00037 203.2-317.5mm 3 203.2 - 241.3mm, 241.3 - 279.4mm, 279.4 - 317.5mm 175mm 0.76mm 0.002 mm 84MAZ-181-7J 00041 0.01 mm 215 starrett.com B ore G ages