Tire Industry Products
Tire Industry Products include systems for component preparation (extrusion, calendering, belt and apex), tire building (carcass, belt/tread and shaping), final finish (bulge and depression, inspection), and R&D (bead-to-bead profile, tire inspection and tread wear measurement).
Off-Line Profilometer

Tread extrusions are no more precise than the dies used to make them. When a new die is cut it should be well-centered, so the operator can optimize the extruder set-up. After some time, uneven die…

On-Line Profilometer

OLP monitors extrusion dimensions and alarms when key dimensions exceed the allowable tolerances. Dimension changes often indicate changes in rubber visco-elastic properties, changes in the equipment…

Ply and Belt Width Monitor

The Belt, Ply, and Extrusion Width Monitor is a general-purpose width measurement system configured for tire manufacturing components such as fabric plies, steel cord breakers, and rubber extrusions. The system...

Green Tire Uniformity System

The Green Tire Uniformity System is a sensor and software package used to scan green tires at any stage of assembly to measure key geometric features that affect cured tire uniformity and balance….

Tread Wear Imaging System

Tire designers are tasked with developing tires with long-lasting tread patterns.  While rubber chemists develop compounds with better wear characteristics, it's up to the designer to…

Tire Geometry Measurement System

Tire Geometry Measurement System GEO-360 is a bulge and depression measurement system for installation on tire uniformity machines and balancers. It features the StarrettSL3 line laser sensor…

Off-Line Profilometer3D

Profilometer3D is the most advanced tread scanning technology available. It is powered by CrossCheckHD dual-triangulating sensors to simultaneously acquire 512 tracks of data in each tread or…

VISAGE

Visage is a stand-alone station for first article inspection of cured tires.  Cycle time is between 1 and 2 minutes depending on tire size.  First article inspection is done after a new mold…