0 products found
Narrow Results Below
Type
- Coating Thickness Gage (1)
- Electronic Durometer (1)
- Ultrasonic Thickness Tester (1)
Range
- Measuring range: 0-40mils (0-1000µm) max (1)
- Measuring Range: 0-100 HSA (1)
- 0.040-12.0" measuring range (in steel with standard probe) (1)
Resolution
- Minimum display unit: 0.001" (0.01mm) selectable (1)
- Resolution: 0.1µm/0.1mils (0-99µm) or 1µm (over 100µm) (1)
- Resolution: 0.5 H (1)
Spec
- Min. measuring area: 0.2" x 0.2" (5mm x 5mm) (1)
- HSA <+/-1 grade (1)
- Guaranteed tolerance: After one-point calibration: +/- 1-3%n or 2µ m (whichever is greater) (1)
- Minimum radius of curvature: Convex: 0.12" (3mm), Concave: 1.2" (30mm) (1)
- Accuracy: ± (0.5% thickness + .001") (1)
- Deviation: <1% H (1)
- Power supply: Two 3V AA alkaline batteries with approximately 100hours of life (with the backlight off) (1)
- Minimum substrate thickness: Ferrous: 20 mils (0.5mm), Non-ferrous: 2 mils (50µm) (1)
- Accurate and repetitive deviation = 20~90HSA (1)
- 20 memory groups (100 files/group) (1)
- 32-122°F operating temperature (1)
- Maximum surface temperature of test object: 302 F (maximum contact time 2 seconds) (1)