64180

1017M-200 Outside Dial Caliper Gage 64180

These gages are designed for use in measuring castings, forgings and sheet metal work. Large clearances have been provided to reach over part configurations for easy measurement of small sections. The convenient retraction lever allows for one hand operation and good gage control. Outside, 0-50mm Range, 0.02mm Grad, 200mm Throat Depth.


Contact Starrett

Features

  • Large clearances have been provided to reach over part configurations for easy measurement of small sections
  • The convenient retraction lever allows for onehand operation and good gage control
  • The dial indicator has a direct reading count hand
  • The contacts are cylindrical carbide for long wear life
  • The dial indicator has a direct reading count hand

Specifications

  • Type: Outside Caliper Gage
  • Range (mm): 0 - 50mm
  • Graduations (mm): 0.02mm
  • Throat Depth (mm): 200mm

Parts

    Member of Kit

    Item #DescriptionPart No.QtyInformation
    10SCREW, #5-40 SLOT X .243 LONG11535-02
    20STUD, LONG24612-01
    30COVER24616-01
    40SCREW, #4-40 SHCS X .250 LONG30249-05
    50PIN, .125D X .625L19860-02
    60GRIP, HANDLE24610-01
    70LEG, CALIPER #1017-824601-01
    80BUSHING #1017-824603-01
    90STUD, PIVOT24604-01
    100SCREW, #4-40 SHCS X .375 LONG09888-01
    110SCREW, #8-32 SLOT X .178 LONG24615-01
    120WSHR,.317X1X.06424607-01
    130GEAR SEGMENT24608-01
    140SPR,.EXT W/HOOK .170X.250X1.20024614-01
    150NUT,ADJUSTING26849-01
    160LEG, CALIPER-LOWER24602-01
    170WSHR,.317X.875X.00524605-02
    180SCREW, #8-32 SLOT X .253 LONG24609-01
    190STUD, SHORT24613-01
    200HANDLE24617-01
    210DIAL IND. ASSEM.25601-01
    220•CASE #101726879-01
    230•BEZEL CLAMP, PLASTIC23417-01
    240•SCREW, .140-40 CLAMP X .281 LONGPT111551
    250•RACK,DIAL IND-METRIC93496-01
    260•PIN, RACK GUIDE #25PT068481
    270•SCREW, #1-64 SLOT X .154 LONGPT093482
    280•SCREW, #3-56 SLOT X .556 LONGPT093522
    290•WSHR,.100X.187X.025PT093502
    300•BACK, INDICATOR24640-01
    310•SCREW, #3-56 PHILLIPS X .190 LONGPT093074
    320•BEZEL & CRYSTALPT994191
    330••BEZEL IND., PLASTICPT234161
    340••CRYSTAL, #25PT066221
    350•SPR WSHR,1.593X2.020X.006PT06673A1
    360•HAND, #25PT083081
    370•HAND, #25 TELL TALEPT066611
    390•DIAL, STAT. #1017M-20025599-01
    400•DIAL,MOVABLE-METRIC93495-01
    410•SCREW, #4-48 SLOT X .231 LONGPT092841
    420•GUIDE09347-01
    430•10mm PLASTIC STEM CAP26402-01
    440•BRIDGE/PLATE ASSEM. 1017M-100 & 1017M-20025559-01
    450••HAIRSPR GEAR, 1017 & 101825563-01
    460••GEAR, RACK ASSEMBLY11852-01
    470••GEAR, INTERMEDIATE ASSEM.PT092951
    480••GEAR, INTERMEDIATE ASSEM.09293-01
    490••BRIDGE, 1017 & 101825554-01
    500••PLATE, 1017 & 101825553-01
    510••BEARING, JEWEL #25PT094221
    520••BEARING,JEWELPT094219
    530••PIN, .094X.30009425-02
    540••PIN, .093X.11109431-02
    550••SCREW, #3-56 PHILLIP X .263 LONGPT094244
    560••SCREW, #1-64 SLOT X .122 LONG25556-01
    570••POST, HAIRSPR. 1017 & 101825555-01
    580••PINION, HANDPT089731

California Proposition 65 Warning

    WARNING: This product contains lead a chemical known to the State of California to cause birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov