51074

236 Depth Gage, 6", 32nds & 64ths 51074

The Combination Steel Rule Depth/Angle Gage is a versatile gage that can be used for calipering, a depth gage by reversing the rule, a protractor, and a hook rule when removed from the tool. It is a simple, handy tool that is a welcome addition to any machinist's toolbox.


Contact Starrett

Features

  • Head is graduated both left and right to 30, 45 and 60 degrees
  • Rule can be set to 30, 45, and 60 degrees
  • Head is made of hardened steel, ground, and nicely polished 2-5/8" (66mm) long and 1/8" (3mm) wide
  • One side of base is cut out to permit easier and more accurate readings
  • Center of head is recessed so that the tool will lay flat to permit easier and more accurate measurements
  • Tempered rule that has been accurately machined divided, is smoothly fitted to the head and can be locked in position by a knurled nut

Specifications

  • Range (in): 0-6"
  • Graduations (in): 32nds, 64ths

Parts

    Member of Kit

    Item #DescriptionPart No.QtyInformation
    1STOCK06068-01
    2TURRET06070-01
    3LOCK BOLT #236PT991621
    4•NUT, .157-4003546-01
    5•WSHR,.160X.375X.01003547-1/21
    6•BOLT, LOCK #23606069-01
    7NARROW STEEL RULE, SPRING-TEMPERED, 6", #10 GRADS610N-6-NP1

California Proposition 65 Warning

    WARNING: This product contains lead a chemical known to the State of California to cause birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov