* Not actual product image

51217

252Z-48 Height Transfer Gage 51217

The Starrett 252 Height Transfer Gage is ideal for use with test indicators or electronic amplifiers to accurately transfer height settings from gage blocks, height gages and other standards. 0-48” (1200mm) Range.


Contact Starrett

Features

  • Extreme rigidity provides the vibration proof stability necessary to permit precise, repeat readings with indicators of the highest amplification
  • Extremely rigid, rectangular box-type hollow column mounted integrally on a heavy base
  • Adjusting mechanism is located in the base so the column and indicator are isolated and not affected by external factors, i.e. heat or hand pressure
  • Hand-fitting base design for sure-grip handling and easy movement
  • Bottom of the base has three ground and lapped pads for stability and smooth movement on the surface plate
  • Adjustable slide, incorporating a snug for holding test indicators or electronic gage heads, has rapid vertical manual adjustment
  • Thumb screw allows slide to be locked
  • Knob on base allows fine vertical adjustment of the slide unit relative to the fixed column
  • A snug on the slide provides two holes (.375" [9.5mm] and .156" [4mm]) for holding gage rods or scribers
  • The rod has a major diameter of .375" (9.5mm) and stepped diameters of 1/4" (3.2mm) and 7/32" (5.5mm) at one end and 5/16" (8mm) at the opposite end.
  • Starrett 25, 81, 655 and 656 Series Dial Indicators also can be used on the height gage by means of a PT06784-A Gage Rod

Specifications

  • Type: Height Transfer Gage
  • : Base Size (Approximate) 9" L x 6" W (225mm x 150mm)
  • Range (in): 0-48"
  • Range (mm): 0-1200mm

Parts

    Member of Kit

    Item #DescriptionPart No.QtyInformation
    1TUBE, VERTICAL17772-01
    2SHIELD17774-01
    3CLAMP, FLAT SPRING18334-01
    4BAR,DOVETAIL #252-4817773-01
    5BLOCK, REED #25217753-A3
    6•BLOCK, REED #25217753-02
    7•REED17781-02
    8•CLAMP, REED30167-04
    9•SCREW, #5-40 FILLIS X 1" LONG17784-04
    10•NUT, #5-40PT020054
    11LEVER, ACTUATING17754-01
    12SCREW, .470-40 THUMB X 1.438 LONG17755-01
    13ROD, 1/4-20 ADJ.17757-01
    14PIN, ACT LEVER PIVOT17779-01
    15SCREW, 1/4-28 LOCK X .750 LONG17761-01
    16ROD, INDICATOR17762-01
    17BOLT/SLEEVE, SPINDLE17763-01
    18WSHR,.202X.558X.06217765-01
    19WSHR,.375X.750X.25017766-01
    20PIN, GIB17768-01
    21SHIELD, SPRING17769-01
    22SCREW, #8-32 FHCS X .625 LONG17775-08
    23GIB, SLIDEPT137921
    24SCREW, 5/16-18 HHCS X 1" LONG17777-02
    25NUT,#8-32 LOCK17776-02
    26NAMEPLATE17778-01
    27SCREW,DRIVE,PLATED16605-02
    28RING, CENT RETAINING13420-01
    29SCREW, #10-32 SET X .188 LONG14439-01
    30GAGE SUB ASSEMBLYPT06784-A1
    31•NUT, .250-3006788-01
    32•SPRING, .280X.330X.500X.025X506789-01
    33•WSHR,.252X.625X.12503114-01
    34SCREW, #6-32 BHCS30941-01
    35SPRING, .238X.324X.500X.043X401860-01
    36NUT, .200-4001874-01
    37SLIDE18982-01
    38BASE #252-2417749-01
    39CASE ONLY, WOOD252ZZ-481NOT SHOWN

Product Testimonials

    Write a product review

    California Proposition 65 Warning

      WARNING: This product contains lead, a chemical known to the State of California to cause birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov