52306

448Z-6 Vernier Depth Gage 52306

These are easy-to-use, very accurate depth gages. They are designed for measuring the depths of holes, slots, and recesses and for inspecting jig, fixtures and die work. They are also ideal for measuring from a plane surface to toolmakers’ buttons for locating center distances. 0-6” Range, .001” Grad, (1) 6” Blade, in Case.


Contact Starrett

Features

  • Heads are hardened, ground and lapped
  • Measuring blades are hardened and ground and have accurate and sharp machine divided graduations
  • All English graduations read to .001", with the bar being graduated in .025" increments
  • All metric graduations read to 0.02mm, with the bar being graduated in 0.5mm increments
  • Screw type adjusting nut allows for fine measuring adjustment
  • Slide lock nut to hold measurement position
  • Vernier plates are adjustable

Specifications

  • Range (in): 0-6"
  • Graduations (in): .001"

Parts

    Member of Kit

    Item #DescriptionPart No.QtyInformation
    10STOCK SUB ASSEMBLYNOT AVAILABLE1
    20BLADE #448-6NOT AVAILABLE(2)1
    30CARRIER SUB ASSEMBLY04185-01
    40GIB, CARRIER04188-01
    50SCREW, .085-60 LOCK X .250 LONG06483-02
    60ROD, .085-60 ADJ.PT041911
    70COLLAR, ADJ. SCREW04192-01
    80NUT, .085-60PT041931
    90PLATE,VERNIER-FRONTNOT AVAILABLE(3)1
    100SCREW, #1-64 SLOT X .088 LONG01195-A2
    110GIB, SPRING04198-01
    120CASE ONLY, WOOD448ZZ-61NOT SHOWN

California Proposition 65 Warning

    WARNING: This product contains lead a chemical known to the State of California to cause birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov