65105

642MZ Top Reading Dial Depth Gage 65105

The Starrett 642 Top Reading Dial Depth Gage uses the back-plunger indicator to provide an upward-facing dial for easier readout. The operator selects the extension and contact point required, zeros the tool on a master and then reads any deviation of the work directly on the dial. 0.01mm Grad, 60mm Base with Extensions and Case.

Features
Specifications
Parts
Downloads
Open Starrett-3D Parts Catalog



Contact Starrett

Features

  • Indicator does not have to be repositioned to get the full range available
  • 2-1/2" (60mm) base
  • Two contacts and five extensions extend the range to 8.6" or 215mm
  • Charts are supplied showing combinations of contacts and extensions required to achieve certain lengths
  • Case is included

Specifications

  • Range (mm): 0-215mm
  • Graduations (mm): 0.01mm
  • Dial Reading: 0-100

Parts

    Member of Kit

    Item #DescriptionPart No.QtyInformation
    1INDICATOR ASSEMBLYNO NUMBER1 
    2•CASE #64126111-01 
    3•SCREW, 1/16-64 SLOT X .188
     LONG
    11793-02 
    4•PLATE GEAR ASSEMBLY #641MPT995181 
    5••SCREW, 1/16-64 SLOT X .107
      LONG
    24010-02 
    6••SUPPORT, RACK PINION24000-01 
    7••PINION, HAND26077-01 
    8••TOP PLATE, METRIC26075-01 
    9••SUPPORT,HAND PIN-MET26081-01 
    10••SUPPORT,RACK PIN-MET26082-01 
    11••SCREW, 1/16-64 X .112 LONG26084-01 
    12••PIN, .062X.16024033-01 
    13••PIN, .062X.12524032-05 
    14••HAIRSPRING&GEAR STAF26079-01 
    15••RACK PINION ASSM-MET26080-01 
    16••BEARING, BRASS #711BPT092782 
    17••STUD/BUSHING26076-02 
    18•PIN, RACK GUIDE24509-02 
    19•GUIDE PIN23994-01 
    20•RACK, METRIC26083-01 
    21•SPRING, .069X.085X.430X.008X1
     4
    24004-01 
    22•SPR. WSHR,1.093X1.50X.00710800-01 
    23•DIAL,#642M STAT.26128-01 
    24•DIAL,#642M MOVABLE26130-01 
    25•HAND, #196PT083601 
    26•HAND, #81 TELL TALE07478-01 
    27•O-RING, RUBBER #8123809-01 
    28•BEZEL/CRYSTAL ASSEMBLYPT994041 
    29••BEZEL, #81PT09282N1 
    30••CRYSTAL, #81PT068461 
    31BASE, 2 1/2"26015-01 
    32CONTACT POINT .35026030-01 
    33CONTACT POINT .55026031-01 
    34EXTENSION, 10MM26055-01 
    35EXTENSION, 20MM26056-01 
    36EXTENSION, 25MM26057-01 
    37EXTENSION, 50MM26058-01 
    38EXTENSION, 100MM26059-01 
    39SCREW, #4-48 SET X .125 LONG26072-02 
    40CASE ONLY, STEEL/VINYL642ZZ1NOT SHOWN