52714

643JZ Dial Depth Gage 52714

The Starrett 643 Dial Depth Gage has a knife-edge base and a needle point contact which has been hardened and ground. The knife-edge base has a cutout so that the conical point can be precisely positioned for close work. Point is 1/2" (12.7mm) long with a 40º included angle. In action, the inspector gently pushes the point down to read zero with the base and then pushes down to make the needle point contact the workpiece to take the measurement. 0-.125” Range, .0005” Grad, 0-25-0 Dial with Case.

Features
Specifications
Parts
Downloads
Open Starrett-3D Parts Catalog



Contact Starrett

Features

  • Hardened, ground needle point contact
  • Knife-edge base which can be precisely positioned for close work
  • Point is 1/2" (17.7mm) long with a 40 degree included angle
  • Case is included
  • 0-.125" Range
  • .0005" Graduation
  • 0-25-0 Dial Reading
  • Case is included

Specifications

  • Range (in): 0-.125"
  • Graduations (in): .0005"
  • Dial Reading: 0-25-0

Parts

    Member of Kit

    Item #DescriptionPart No.QtyInformation
    10BASE, #64308228-01
    20WSHR,.113X.187X.080PT077622
    30SCREW, #4-48 SHCS X .375 LONGPT077612
    40SCREW, #3-56 SLOT X .556 LONGPT093522
    50WSHR,.100X.187X.025PT093502
    60BACK, INDICATOR #25PT261601
    70SCREW, #3-56 PHILLIPS X .190 LONGPT093074
    80BEZEL/CRYSTAL ASSEMBLYPT994191
    90•BEZEL IND., PLASTICPT234161
    100•CRYSTAL, #25PT066221
    110SPR WSHR,1.593X2.020X.01506662-01
    120HAND, #25PT083081
    130DIAL, REG. 643-13111158-21
    140CASE SUB-ASSEMBLY09340-101
    150•PIN, RACK GUIDE #25PT068481
    160•SPR, .105X.125X.56306888-01
    170•PUSHBUTTON #64007197-01
    180•CONTACT POINT #643PT082291
    190•GUIDE09347-01
    200•SCREW, #1-64 SLOT X .154 LONGPT093482
    210•RACK, .125 RANGE09540-01
    220•CASE SUB-ASSEMBLY,#25 TOP LIFTPT227031
    230•BEZEL CLAMP, PLASTIC23417-01
    240•SCREW, .140-40 CLAMP X .281 LONGPT111551
    250BRIDGE/PLATE ASSEMBLY09315-01
    260•PLATE SUB ASSEMBLY09392-01
    270••PLATE09396-01
    280••BEARING,JEWELPT094213
    290•BRIDGE SUB ASSEMBLYPT094101
    300••BRIDGE #2509414-01
    310••BEARING, JEWEL #25PT094221
    320••BEARING,JEWELPT09421(2)2
    330••PIN, .094X.30009425-02
    340•PINION, HANDPT089731
    350•GEAR, RACK ASSEMBLYPT092991
    360•SCREW, #3-56 PHILLIP X .263 LONGPT094244
    370•HAIRSPR GEAR ASSEM.PT092891
    380•POST, HAIRSPRING09418-01
    390•SCREW, #1-64 SLOT X .148 LONG23449-01
    400CASE ONLY, STEEL/VINYL643ZZ1NOT SHOWN