56028

644MJ Dial Depth Gage 56028

The Starrett 644 Dial Depth Gage is for longer ranges, and is accurate and simple to use. Put the contact on the work to be measured and push the gage head down until the base stops at the reference point and take your reading. Furnished with three rounded-end contact points to cover the range. Flat end contact points are also available on special order. The zero setting can be checked with the (shortest) contact in place by pushing down on a flat surface. 0-75mm Range, 0.01mm Grad, 0-100 Dial.

Features
Specifications
Parts
Downloads
Open Starrett-3D Parts Catalog



Contact Starrett

Features

  • For longer ranges, are accurate, and simple to use
  • Furnished with three rounded-end contact points to cover the range
  • Flat end contact points are also available on special order
  • 0-75mm Range
  • 0.01mm Graduation in Case
  • 0-100 Dial Reading

Specifications

  • Range (mm): 0-75mm
  • Graduations (mm): 0.01mm
  • Dial Reading: 0-100

Parts

    Member of Kit

    Item #DescriptionPart No.QtyInformation
    1INDICATORNOT AVAILABLE1
    2•CASE SUB-ASSEMBLY FOR 2 TO 3 GEARPT227001
    3•BRIDGE/PLATE ASSEM.11274-01
    4••SCREW, #3-56 PHILLIP X .263 LONGPT094244
    5••SCREW, #1-64 SLOT X .148 LONG23449-01
    6••POST, HAIRSPRING11287-01
    7••PINION, HANDPT089731
    8••HAIRSPR GEAR ASSEM.09288-R1
    9••GEAR, RACK ASSEMBLYPT118531
    10••GEAR, IDLER ASSEMBLY11275-01
    11••BRIDGE #2509414-01
    12••BEARING, JEWEL #25PT094221
    13••BEARING,JEWELPT094213
    14••PIN, .094X.30009425-02
    15••PLATE09396-01
    16••PIN, .093X.11109431-02
    17••BEARING,JEWELPT094214
    18•SCREW, #3-56 SLOT X .556 LONGPT093522
    19•WSHR,.100X.187X.025PT093502
    20•BACK, FLAT PLASTIC #25PT261601
    21•SCREW, #3-56 PHILLIPS X .190 LONGPT093074
    22•BEZEL & CRYSTALPT994191
    23••BEZEL IND., PLASTICPT234161
    24••CRYSTAL, #25PT066221
    25•SPR WSHR,1.593X2.020X.006PT06673A1
    26•HAND, #25PT083081
    27•HAND, #81 TELL TALE07478-02
    28•DIAL,STAT 644-881MJ25165-21
    29•DIAL, MOV 25MM RANGE25195-R1
    30•25mm PLASTIC STEM CAP26403-01
    31•SCREW, #4-48 SLOT X .231 LONGPT092841
    32•BEZEL CLAMP, PLASTIC23417-01
    33•SCREW, .140-40 CLAMP X .281 LONGPT111551
    34•RACK, 25MM RANGEPT112651
    35•PIN, RACK GUIDE #25PT093421
    36•GUIDEPT093441
    37•SCREW, #1-64 SLOT X .154 LONGPT093482
    38•SPR, .139X.159X.050 RETURNPT095931
    39BASE, #64408226-01
    40SCREW, #4-48 SHCS X .375 LONGPT077612
    41WSHR,.113X.187X.080PT077622
    42SET OF 3 CONTACT POINTSNOT AVAILABLE(2)1FACTORY REPL. ONLY