01120

796.1MXRL-25 Electronic Micrometer without Output - Metric Only 01120

The Starrett 796.1 Electronic Micrometers provide an IP67 level of protection against coolant, water, chips, dirt, dust, and other contaminants in hostile shop environments. The 796.1 Electronic micrometers are built with customary Starrett quality and workmanship. 0-25mm Range, With Ratchet Stop, With Carbide Faces, Without Output.


Contact Starrett

Features

  • IP67 protection against coolants, water, chips, dust and dirt often found in machine shop environments
  • Balanced frame for comfortable and accurate measuring
  • Large, easy-to-read, high-contrast LCD digital readout
  • Starrett No-glare satin chrome finish on thimble and sleeve minimizes annoying surface glare under bright lights indoors or filters out UV light
  • No-glare black wrinkle finish on frame
  • Hard and stable one-piece thimble with rachet lock permits one-hand operation of micrometer and uniform contact pressure
  • Inch/millimeter metric conversion provides simple, universal, standardized unit of measurement at any position
  • Ring-type knurled lock nut for quick and sure locking
  • Micro-lapped carbide measuring faces

Specifications

  • Micrometer Type: Outside
  • Range (mm): 0-25mm
  • Resolution (mm): 0.001mm
  • Anvil/Spindle Material: Carbide
  • Anvil Type: Flat
  • Spindle Type: Flat
  • Lock Nut Type: Lever
  • Thimble Type: Ratchet
  • Thimble Graduations: Metric
  • Display Type: LCD
  • SPC Output: No
  • Accuracy (in): +/-.0001"
  • Accuracy (mm): +/-.002mm

Parts

    Member of Kit

    Item #DescriptionPart No.QtyInformation
    1IP67 MICROMETER FRAME 1", (NON-OUTPUT)NOT AVAILABLE1
    2FRONT INSULATOR, 25mm IP67 MICROMETER06349-01
    3INSULATOR, REAR63277-01
    4SCREW, SLOTTED CHEESE HEAD M1.6 x .35mm x 12mm LONG62692-02
    5NUT, .375-52 IP67 MICROMETER06414-01
    6U-CUP COLLAR GASKET-IP67 MICROMETER06418-01
    7O-RING, METRIC 10MM ID X 1MM THICK06405-02
    8METRIC STEM, IP67 MICROMETER06172-01
    9U CUP COLLAR, IP67 MICROMETER06497-01
    10ANVIL, CARBIDE TIP19110-01
    11SPINDLE-IP67 MIC-25mm06442-01
    12SHELL, ADJUSTING-METRIC-IP67 MICROMETER06417-01
    13RATCHET ASSEMBLY01431-01
    14•BODY, RATCHET #23019773-01
    15•PIN, RATCHET .066D X .156LPT189761
    16•SPRING, .035 X .061 X.188 X.012 X 601429-01
    17•SCREW, #2-64 SLOT X .204 LONGPT197721
    18•CAP ASSEMBLYPT994451
    19••RATCHET13196-01
    20••CAP, RATCHET07671-B1
    21SHELL, METRIC23610-01
    22SPRING/WASHER COMBINATION, PLASTIC28289-01
    23ROTOR MOUNT ASSEM26286-01
    24SCREW, #5-40 SET X .125 LONG17899-01
    25SCREW, #5-40 SET X .168 LONG23890-01
    26STATOR MOUNT ASSEMBLY, 795/796 MICROMETER63573-01
    27FLEX CABLE, 795.1/796.1 MICROMETER63541-01
    28O-RING, METRIC 4MM ID X 1MM THICK06408-01
    29SPINDLE LOCK62687-01
    30BATTERY RETAINER, 795/796 MICROMETER63529-01
    31TEFLON BUSHING IP67 MICROMETER (NEW STYLE)06173-01
    32BATTERY, CR2032 SET OF 2PT994921
    33SCREW, M3 X .05 X 6MM BHCS - BLACK06415-01
    34SPRING, BARREL06419-01
    35SCREW, LOCK IP67 MIC.06410-01
    36SCREW, #2 X 5/16" LG. PHILLIPS FLAT HEAD SELF TAPPING06407-02
    37SCREW, SLOTTED CHEESE HEAD M1.4 x .3mm x 6mm LONG62693-02
    38NEGATIVE BATTERY CONTACT62679-01
    39POSITIVE BATTERY CONTACT62678-01
    40SCREW, SLOTTED CHEESE HEAD M1.6 x .35mm x 4mm LONG62691-03
    41O-RING 1" ID X 1/16" THICK #AS-568A-02206406-01
    42BATTERY CAP, IP67 MICROMETER06174-01
    43BEZEL ASSEMBLY, METRIC (NON-OUTPUT) - 796.1 MICROMETER63639-01
    44WRENCH #216PT188951
    45CAT.#795/796 PLASTIC CASE06437-01NOT SHOWN

Product Testimonials

    Write a product review

    California Proposition 65 Warning

      WARNING: This product contains lead, a chemical known to the State of California to cause birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov