01104

796.1XFL-1 Electronic Micrometer without Output 01104

The Starrett 796.1 Electronic Micrometers provide an IP67 level of protection against coolant, water, chips, dirt, dust, and other contaminants in hostile shop environments. The 796.1 Electronic micrometers are built with customary Starrett quality and workmanship. 0-1" Range, With Friction Thimble, With Carbide Faces, Without Output.


Contact Starrett

Features

  • IP67 protection against coolants, water, chips, dust and dirt often found in machine shop environments
  • Balanced frame for comfortable and accurate measuring
  • Large, easy-to-read, high-contrast LCD digital readout
  • Starrett No-glare satin chrome finish on thimble and sleeve minimizes annoying surface glare under bright lights indoors or filters out UV light
  • No-glare black wrinkle finish on frame
  • Hard and stable one-piece friction thimble permits one-hand operation of micrometer and uniform contact pressure
  • Inch/millimeter metric conversion provides simple, universal, standardized unit of measurement at any position
  • Ring-type knurled lock nut for quick and sure locking
  • Micro-lapped carbide measuring faces

Specifications

  • Micrometer Type: Outside
  • Range (in): 0-1"
  • Range (mm): 0-25mm
  • Resolution (in): .00005"
  • Resolution (mm): 0.001mm
  • Anvil/Spindle Material: Carbide
  • Anvil Type: Flat
  • Spindle Type: Flat
  • Lock Nut Type: Lever
  • Thimble Type: Friction
  • Thimble Graduations: English
  • Display Type: LCD
  • SPC Output: No
  • Accuracy (in): +/-.0001"
  • Accuracy (mm): +/-.002mm

Parts

    Member of Kit

    Item #DescriptionPart No.QtyInformation
    1IP67 MICROMETER FRAME 1", (NON-OUTPUT)06476-01
    2FRONT INSULATOR, 1" IP67 MICROMETER06347-01
    3INSULATOR, REAR63277-01
    4SCREW, #2 X 5/16" LG. PHILLIPS FLAT HEAD SELF TAPPING06407-02
    5NUT, .375-52 IP67 MICROMETER06414-01
    6U-CUP COLLAR GASKET-IP67 MICROMETER06418-01
    7O-RING, METRIC 10MM ID X 1MM THICK06405-02
    8STEM, IP67 MICROMETER06379-01
    9U CUP COLLAR, IP67 MICROMETER06497-01
    10ANVIL, CARBIDE TIP19110-01
    11SPINDLE IP67 MIC. 1"06404-01
    12SHELL, ADJUSTING-IP 67 MICROMETER06416-01
    13FRICTION SHELL ASSEMBLY23488-01
    14CAP, SHELL18894-01
    15SCREW, .157-40 SLOT X .377 LONG05136-01
    17SPRING/WASHER COMBINATION, PLASTIC28289-01
    18ROTOR MOUNT ASSEM26286-01
    19SCREW, #5-40 SET X .125 LONG17899-01
    20SCREW, #5-40 SET X .168 LONG23890-01
    21STATOR MOUNT ASSEMBLY, 795/796 MICROMETER63573-01
    22FLEX CABLE, 795.1/796.1 MICROMETER63541-01
    23O-RING, METRIC 4MM ID X 1MM THICK06408-01
    24SPINDLE LOCK62687-01
    25BATTERY RETAINER, 795/796 MICROMETER63529-01
    26TEFLON BUSHING IP67 MICROMETER (NEW STYLE)06173-01
    27BATTERY, CR2032 SET OF 2PT994921
    28SCREW, M3 X .05 X 6MM BHCS - BLACK06415-01
    29SPRING, BARREL06419-01
    30SCREW, LOCK IP67 MIC.06410-01
    31SCREW, SLOTTED CHEESE HEAD M1.6 x .35mm x 12mm LONG62692-02
    32SCREW, SLOTTED CHEESE HEAD M1.4 x .3mm x 6mm LONG62693-02
    33NEGATIVE BATTERY CONTACT62679-01
    34POSITIVE BATTERY CONTACT62678-01
    35SCREW, SLOTTED CHEESE HEAD M1.6 x .35mm x 4mm LONG62691-03
    36O-RING 1" ID X 1/16" THICK #AS-568A-02206406-01
    37BATTERY CAP, IP67 MICROMETER06174-01
    38BEZEL ASSEMBLY (NON-OUTPUT), 796.1 MICROMETER63638-01
    39WRENCH #216PT188951
    40CAT.#795/796 PLASTIC CASE06437-01NOT SHOWN

California Proposition 65 Warning

    WARNING: This product contains lead a chemical known to the State of California to cause birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov