Simple, Economical Electronic Measuring Tools
Starrett has recently added two new electronic tools to its product line. Working off of the head of the smaller 799 electronic slide calipers, the 3751 Height Gage and the 3753 Series Depth Gages were developed as basic-feature, non-output electronic tools offered at an economical price point.

Common Features & Specifications
The 3751 Height Gage and the 3753 Series Depth Gages share the following electronic features and specifications:

• Easy-to-read LCD with .32" high characters
• Inch-millimeter conversion
• Zero at any position
• Manual ON/OFF w/auto OFF after 5 minutes of nonuse
• Easy access to single long-life battery, 3-volt CR2032
• Linear Accuracy: ±.001" (± 0.03mm)
• Resolution: .0005" (0.01mm)

No. 3751 Electronic Height Gage
Introduced about a year ago, the 3751 Electronic Height Gage is light, portable and easy to use for vertical measurements within its range. It is offered as a single product with a 0-6" /0-150mm range.

In addition to the common features listed above, the 3751 offers the following:

• Rounded nose scriber cuts clean, sharp lines
• Long life hardened, stainless steel bar
• Scriber can reference zero from the base bottom to get
   the full 60 (150mm) usable range
• Hardened, ground, and lapped base with finger grooves
   provides ease of movement
• Vertical bar is back from the edge of the nose for better stability
• Fine adjustment thumb roll for precision measurements
• Lock to hold the slide in position
• Depth attachment, No. PT08680A (EDP 51383) available
   separately for measuring depth of holes, slots, and recesses
• Optional wood case

The ordering information for the 3751 Height Gage is as follows: Cat. No. 3751AZ (EDP 12221).

3753 Series' Depth Gages
One of the most recent additions to the Starrett family of measuring tools is the 3753 Series' of Depth Electronic Gages.

Available with a choice of
0-6"/0-150mm (right), 0-8"/0-200mm & 0-12"/0-300mm measuring ranges, they share the simple, economical non-output electronic tool attributes of
the 3751 Height Gage and 799 Calipers.

In addition to the common features listed above, 3753s offer the following:

• Fine adjustment thumb roll
• Long life hardened, stainless steel bar
• Lock to hold the slide in position
• Base Extensions available for all sizes:
   - 180mm (7.09"). Cat. 3648-180 (EDP 12261)
   - 260mm (10.24"). Cat. 3648-260 (EDP 12262)
   - 320mm (12.6"). Cat. 3648-320 (EDP 12263)

Ordering information for the three available sizes are:
• 6”/150mm Electronic Depth Gage: Cat. 3753A-6/150 (EDP 12258)
• 8”/200mm  Electronic Depth Gage: Cat. 3753A-8/200 (EDP 12259)
• 12”/300mm  Electronic Depth Gage: Cat. 3753A-12/300 (EDP 12260)

The 6” model depth gage (Cat. No. 3753A-6/150 • EDP: 12258).