1017M-100 Outside Dial Caliper Gage

1017, 1017M Dial Caliper Gages
Outside Dial Caliper Gage, 0-50mm, 0.02mm, 100mm

These gages are designed for use in measuring castings, forgings and sheet metal work. Large clearances have been provided to reach over part configurations for easy measurement of small sections. The convenient retraction lever allows for one hand operation and good gage control. Outside, 0-50mm Range, 0.02mm Grad, 100mm Throat Depth.

Note:
This item is discontinued. Please consider the recommended alternative listed above or contact our special order department at (978) 249-3551 x410 for more information.


Contact Starrett

Features

  • Large clearances have been provided to reach over part configurations for easy measurement of small sections
  • The convenient retraction lever allows for onehand operation and good gage control
  • The dial indicator has a direct reading count hand
  • The contacts are cylindrical carbide for long wear life
  • The dial indicator has a direct reading count hand

Specifications

  • Made in America: Yes
  • Type: Outside Caliper Gage
  • Range (mm): 0 - 50mm
  • Graduations (mm): 0.02mm
  • Throat Depth (mm): 100mm

3D CAD Files / Exploded Parts Diagram

    Login to see related product files. Or create an account.

Product Testimonials

    Write a product review

    Parts

      Member of Kit
      Item #DescriptionPart No.QtyInformation
      10LEG, CALIPER #1017-424958-01
      20LEG, CALIPER-LOWER24961-01
      30STUD, PIVOT24604-01
      40NUT,ADJUSTING26849-01
      50GEAR, RACK24962-01
      60SCREW, #5-40 SLOT X .243 LONG11535-02
      70SPR, EXT W/HOOK .136X.200X.99224965-01
      80SCREW, #2-56 SHCS X .500 LONG22098-02
      90HANDLE24968-01
      100PIN, .125D X .625L19860-02
      110GRIP, HANDLE24610-01
      120WSHR,.317X.875X.00524605-02
      130COVER24966-01
      140SCREW, #4-40 SHCS X .188 LONG30168-03
      150SCREW, #8-32 SLOT X .253 LONG24609-01
      160STUD, LONG24963-01
      170STUD, SPRING ANCHOR24964-01
      180BUSHING #1017-424969-01
      190WSHR,.317X.937X.06124970-02
      200SCREW, #4-40 PNH BLK X .125 LONG24975-01
      210DIAL IND. ASSEM.93516-01
      220•CASE #101726879-01
      230•BEZEL CLAMP, PLASTIC23417-01
      240•SCREW, .140-40 CLAMP X .281 LONGPT111551
      250•RACK,DIAL IND-METRIC93496-01
      260•PIN, RACK GUIDE #25PT068481
      270•SCREW, #1-64 SLOT X .154 LONGPT093482
      280•SCREW, #3-56 SLOT X .556 LONGPT093522
      290•WSHR,.100X.187X.025PT093502
      300•BACK, INDICATOR24640-01
      310•SCREW, #3-56 PHILLIPS X .190 LONGPT093074
      320•BEZEL & CRYSTALPT994191
      330••BEZEL IND., PLASTICPT234161
      340••CRYSTAL, #25PT066221
      350•SPR WSHR,1.593X2.020X.006PT06673A1
      360•HAND, #25PT083081
      370•HAND, #25 TELL TALEPT066611
      380•DIAL,STAT. 50MM93515-01
      390•DIAL,MOVABLE-METRIC93495-01
      400•SCREW, #4-48 SLOT X .231 LONGPT092841
      410•GUIDE09347-01
      420•BRIDGE/PLATE ASSEM. 1017M-100 & 1017M-20025559-01
      430••HAIRSPR GEAR, 1017 & 101825563-01
      440••GEAR, RACK ASSEMBLY11852-01
      450••GEAR, INTERMEDIATE ASSEM.PT092951
      460••GEAR, INTERMEDIATE ASSEM.09293-01
      470••BRIDGE, 1017 & 101825554-01
      480••PLATE, 1017 & 101825553-01
      490••BEARING, JEWEL #25PT094221
      500••BEARING,JEWELPT094219
      510••PIN, .094X.30009425-02
      520••PIN, .093X.11109431-02
      530••SCREW, #3-56 PHILLIP X .263 LONGPT094244
      540••SCREW, #1-64 SLOT X .122 LONG25556-01
      550••POST, HAIRSPR. 1017 & 101825555-01
      560••PINION, HANDPT089731
      570•10mm PLASTIC STEM CAP26402-01
      580SCREW, #4-40 SHCS X .375 LONG09888-01

    California Proposition 65 Warning

      WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov