1102 Dial Indicator Diameter Gage 56134

Dial Indicator Diameter Gages measure both outside and inside diameters by comparing dimensions to gage blocks or an adjustable setting master. Each gage consists of a strong rectangular box beam with a sensitive gaging contact at one end and a reference gaging contact at the other. The 1102 is a light, easy-to-handle gage that is a workhorse in its range. Approximate weight is 1 lb, 12 oz. (0.8kg). The gaging depth can be set within a range of 0-1" (0-25mm) by adjusting the rest foot. Dial indicators are the 81-136-623 Inch Reading (.0005") or 81-181- 623 Millimeter Reading (0.01mm) models. The gage should be checked against our 1127 Master for a precise reference standard during production gaging. Also available on request with .0001" or 0.002mm graduations. 1-12" Length Range, 0-1" Height Adjustment The gage should be checked against our 1127 Master for a precise reference standard during production gaging. Also available on request with .0001" or 0.002mm graduations. Range: 1-12", Graduation: .0005"

Contact Starrett


  • The sensitive contact transfers dimensions to the dial indicator through a linear friction-free mechanism
  • There are two gage feet at the reference end and one foot at the sensitive end of the gage to set the gage on the work and align the contacts
  • Gage depth is set by adjusting the gage feet up or down
  • A lever-actuated reverse mechanism loads the gage for either inside or outside diameter measurements
  • The gage contacts are easily changed to I.D. or O.D. gaging by turning them end for end
  • Unless otherwise specified, the dial indicator sent with the gage reads in .0005" increments with a total range of +/-.030"
  • The dial has a double row of graduations reading in opposite directions - minus in red and plus in black


  • Range (in): 1-12"
  • Graduations (in): .0005"


  • 1102ZZ (56136)
    1102ZZ Wood Case (holds Gage/Master)


    Member of Kit
    Item #DescriptionPart No.QtyInformation
    1GAGE, #110230300-01
    2•SCREW, #4-40 BHCS X .250 LONG30117-02
    3•SCREW, #8-32 SHCS X .625 LONG30242-02
    4•HOUSING, 110230301-01
    5•LEG, REST30306-03
    6•PLATE,REAR REST LEG30307-01
    7•PLATE,REST PAD30308-01
    8•HOLDER, CONTACT30314-02
    10•SLIDE SUB ASSEMBLY30317-01
    12•FASTENER, 5/16" PLUG30326-01
    14•SCREW, #6-32 FHCS X .250 LONG30332-02
    15•LOCK, LEFT HAND PAD30334-01
    16•PAD, RIGHT HAND30335-01
    18•LOCK, FINE ADJUSTING30924-01
    19•SPRING, .267X.329X.378X.031X430947-01
    20•SCREW, #8-32 SHCS X .375 LONG30970-04
    22••CASE, #81 2&3 GEAR23017-01
    23••10mm PLASTIC STEM CAP26402-01
    24••SCREW, #4-48 SLOT X .231 LONGPT092841
    25••CLAMP, BEZELPT112771
    26••SCREW, .140-40 CLAMP X .281 LONGPT111551
    27••RACK, .075 RANGE09472-01
    28••PIN, RACK GUIDE #81PT093431
    29••GUIDE, RACK09346-01
    30••SCREW, #1-64 SLOT X .154 LONGPT093482
    31••SPRING, .166X.186X.875X.010X 1209969-01
    33••PIN, .042X.187PT093581
    34••CONTACT, FLAT 1/810883-01
    35••BRIDGE/PLATE ASSEM.11619-01
    36•••BRIDGE SUB ASSEMBLY09399-01
    39••••PIN, .094X.30009425-02
    40••••BEARING, JEWEL #25PT094221
    41•••PLATE SUB ASSEMBLY11618-01
    44•••SCREW, #1-64 SLOT X .148 LONG23449-01
    45•••PINION, HANDPT089731
    46•••HAIRSPR GEAR ASSEM.11617-01
    47•••GEAR, RACK ASSEMBLYPT092971
    48•••GEAR, INTERMEDIATE ASSEM.09290-01
    49•••POST, HAIRSPRING09418-01
    50•••SCREW, PHILLIPS HEAD #1-64 X .267 LONGPT119754
    51••SCREW, #1-64 SLOT X .264 LONGPT094232
    53••BACK, FLAT PLASTIC #81PT249211
    54••SCREW, #1-64 SLOT X .148 LONG23449-0(2)4
    55••O-RING, RUBBER #8123809-01
    56••BEZEL & CRYSTALPT994041
    57•••BEZEL, #81PT09282N1
    58•••CRYSTAL, #81PT068461
    59••SPR. WSHR,1.093X1.50X.00710800-01
    60••HAND, #81PT083041
    61••HAND, #81 TELL TALE07478-01
    62••DIAL,STAT 81-136-623J11744-01
    63••DIAL,MOV. 81-136-62311745-01
    64••STUD, CENTER19082-01
    65••STUD, TELLTALE19083-01
    67•SCREW, #1-6406611-02
    68•SCREW, #4-40 SHCS X .375 LONG09888-04

3D CAD Files / Exploded Parts Diagram

    Login to see related product files. Or create an account.

Product Testimonials

    Write a product review

    California Proposition 65 Warning

      WARNING: This product contains lead a chemical known to the State of California to cause birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov