683-3Z Internal Chamfer Gage

683, 683M Internal Chamfer Gages, 0-90°
Inch Reading Dial Indicator Internal Chamfer Gage, 0-1" Range, 0-90 Angle

These gages directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a fl at surface, the gage should read the set number stamped on the back of the indicator. In case of wear, the gage may be adjusted to read the proper number. 0-1" Range In case of wear, the gage may be adjusted to read the proper number.


Contact Starrett

Features

  • When the three-blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator
  • No setting master is necessary
  • Internal gages will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face
  • Gages are also available with electronic indicators on request
  • Deluxe Padded Case
  • All ground surfaces are of hardened tool steel
  • Indicators are AGD design

Specifications

  • Made in America: Yes
  • Type: Chamfer Gage
  • Range (in): 0 - 1"
  • Graduations (in): .001"
  • Dial Reading: For 0 -90 Degree Angles

3D CAD Files / Exploded Parts Diagram

    Login to see related product files. Or create an account.

Product Testimonials

    Write a product review

    Parts

      Member of Kit
      Item #DescriptionPart No.QtyInformation
      1BODY-CHAMFER GAGE23673-01
      2STEM INSERT24660-01
      3GAGE HEAD #683 0-1"23664-01
      4HEAD NUT, 1.00023677-01
      5SPR, .640X.716X2.500 COMPRESSION23684-01
      6CONTACT, BALL ENG 4-48, 3mm DIA, BLACK01761-01
      7NUT,INDICATOR COLLET23654-01
      8INDICATOR FOR 68328357-01
      9•CASE SUB-ASSEMBLY FOR 2 TO 3 GEARPT227001
      10•SCREW, #4-48 SLOT X .231 LONGPT092841
      11•CAP, CASE STEM09903-01
      12•BEZEL CLAMP, PLASTIC23417-01
      13•SCREW, .140-40 CLAMP X .281 LONGPT111551
      14•RACK, .550 RANGE90990-01
      15•PIN, RACK GUIDE #25PT093421
      16•GUIDEPT093441
      17•SCREW, #1-64 SLOT X .154 LONGPT093482
      18•SPRING, .105X.125X.4688X.010PT066261
      19•BRIDGE/PLATE ASSEM.09908-01
      20••BRIDGE SUB ASSEMBLYPT094101
      21•••BRIDGE #2509414-01
      22•••BEARING, JEWEL #25PT094221
      23•••BEARING,JEWELPT09421(2)2
      24•••PIN, .094X.30009425-02
      25••PLATE SUB ASSEMBLY09429-01
      26•••PLATE09396-01
      27•••BEARING,JEWELPT094213
      28•••PIN, .093X.11109431-02
      29••SCREW, #3-56 PHILLIP X .263 LONGPT094244
      30••SCREW, #1-64 SLOT X .148 LONG23449-01
      31••POST, HAIRSPRING09418-01
      32••PINION, HANDPT089731
      33••HAIRSPR GEAR ASSEM.PT92891
      34••GEAR, RACK ASSEMBLYPT093031
      35•SCREW, #3-56 SLOT X .556 LONGPT093522
      36•WSHR,.100X.187X.025PT093502
      37•BACK, INDICATOR #25PT261601
      38•SCREW, #3-56 PHILLIPS X .190 LONGPT093074
      39•BEZEL/ CRYSTAL ASSEMBLYPT994191
      40••BEZEL IND., PLASTICPT234161
      41••CRYSTAL, #25PT066221
      42•SPR WSHR,1.593X2.020X.006PT06673A1
      43•HAND, #25PT083081
      44•HAND, #25 TELL TALEPT066611
      45•DIAL,STAT. 0-90 I.D.23679-01
      46•DIAL,REVERSE 25-441RPT11040R1
      47CASE ONLY, STEEL/VINYL690ZZ-11NOT SHOWN

    California Proposition 65 Warning

      WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov