64996

684M-4Z Metric Internal Chamfer Gage 64996

These gages directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a fl at surface, the gage should read the set number stamped on the back of the indicator. In case of wear, the gage may be adjusted to read the proper number. 25-50mm Range In case of wear, the gage may be adjusted to read the proper number.


Contact Starrett

Features

  • When the three-blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator
  • No setting master is necessary
  • gages will measure the smallest diameter of any chamfer within the range of angles printed on the dial face of the gage
  • Gages are also available with electronic indicators on request
  • Deluxe Padded Case
  • All ground surfaces are of hardened tool steel
  • Indicators are AGD design

Specifications

  • Type: Chamfer Gage
  • Range (mm): 25 - 50mm
  • Dial Reading: For 90 -127 Degree Angles

Parts

    Member of Kit
    Item #DescriptionPart No.QtyInformation
    10BODY FOR CHAM/CSK GA23674-01
    15STEM INSERT24660-01
    20GAGE HEAD #68423669-01
    30SPRING23684-01
    40HEAD NUT23748-01
    50NUT,INDICATOR COLLET23654-01
    70CONTACT POINT06677-01
    80INDICATOR28389-01
    90•CASE SUB ASSEMBLY22700-01
    100•SCREW, #4-48 SLOT X .231 LONG09284-01
    110•CAP, CASE STEM09903-01
    120•BEZEL CLAMP, PLASTIC23417-01
    130•SCREW, .140-40 CLAMP X .281 LONG11155-01
    140•RACK, 13MM RANGE26797-01
    150•PIN, RACK GUIDE #2509342-01
    160•GUIDE09344-01
    170•SCREW, #1-64 SLOT X .154 LONG09348-02
    180•SPRING, .105X.125X.4688X.01009593-01
    200•BRIDGE/PLATE ASSEM.11268-01
    210••BRIDGE SUB ASSEMBLY09410-01
    220•••BRIDGE #2509414-01
    230•••BEARING, JEWEL #2509422-01
    240•••BEARING,JEWEL09421-02
    250•••PIN, .094X.30009425-02
    260••PLATE SUB ASSEMBLY09429-01
    270•••PLATE09396-01
    280•••BEARING,JEWEL09421-03
    290•••PIN, .093X.11109431-02
    300••HAIRSPR GEAR ASSEM.09289-R1
    310••SCREW, #3-56 PHILLIP X .263 LONG09424-04
    320••SCREW, #1-64 SLOT X .148 LONG23449-01
    330••POST, HAIRSPRING11287-01
    340••PINION, HAND08973-01
    350••GEAR, RACK PINION ASSEMBLY11853-01
    370•SCREW, #3-56 SLOT X .556 LONG09352-02
    380•WSHR,.100X.187X.02509350-02
    390•BACK, INDICATOR #2526160-01
    400•SCREW, #3-56 PHILLIPS X .190 LONG09307-04
    410•BEZEL/ CRYSTAL ASSEMBLYPT994190
    420••BEZEL IND., PLASTIC23416-01
    430••CRYSTAL, #2506622-01
    440•SPR WSHR,1.593X2.020X.00606673-A1
    450•HAND, #2508308-01
    460•HAND, #25 TELL TALE06661-01
    470•DIAL,STAT METRIC27112-01
    480•DIAL,METRIC MOVABLE26819-01
    490LABEL SHOWING SET DIMENSIONFACTORY SUPPLY1
    500CASE ONLY, STEEL/VINYL690ZZ-11NOT SHOWN

3D CAD Files / Exploded Parts Diagram

    Login to see related product files. Or create an account.

Product Testimonials

    Write a product review

    California Proposition 65 Warning

      WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov