00037

84MAZ-161-7J Dial Bore Gages (203.2 - 308mm Range) 00037

Starrett 84 bore gages allow for bore measurements beyond the size range of our 82 Series. They are comparison gages and should be set with a master ring gage, gage blocks with parallel jaws, outside micrometers or vernier calipers. Ring gages are available by request, quoted by application. Good practice is to set the gage to zero, as near to the desired dimension as possible. 203.2-308mm Range 0.002mm Grad


Contact Starrett

Features

  • Can be easily held to inspect bores and hole sizes without removing the workpiece
  • An adjustable range screw and two centralizing plungers provide accurate, three-point contact for tool alignment in larger bores
  • All contacts and centralized plungers are of hardened tool steel for wear and spring-loaded for sensitivity
  • The housing and knurled handle are aluminum for light weight and good balance
  • Dial indicators have jewel bearings for sensitivity
  • Furnished in finished wood case
  • Bore depths are also available up to 12" (300mm) in 1" (25mm) increments on special order
  • Also available with carbide contacts or electronic indicators with output capability on special order

Specifications

  • Range (mm): 203.2 - 308mm
  • Graduations (mm): 0.002mm
  • Approximate Measuring Depth (mm): 175mm

Parts

    Member of Kit
    Item #DescriptionPart No.QtyInformation
    1SCREW, #8-32 SHCS X .375 LONG30970-02
    2HOUSING CLAMP12271-01
    3HOUSING12270-01
    4HANDLE12370-01
    5HANDLE CAP12272-01
    6BORE GAGE SUB-ASSEMBLY12378-01
    7•EXTENSION HOUSING SUBASSEMBLY12286-01
    8•EXTENSION PLUNGER12290-01
    9•RING, EXT RETAINING11445-01
    10•SPR WSHR, .190X.281X.00606822-01
    11•SPRING, .196X.238X1.0625X.021 X1113429-01
    12•TRANSFER BUSHING12328-01
    13•90 DEGREE TRANSFERNOT AVAILABLE1
    14•DOWEL PIN, 1.5MM X 8MM, HARDENED STEEL (ALLOY STEEL)12326-01
    15•SCREW, #5-40 SLOT X .438 LONG13470-03
    16•SCREW, #5-40 SET X .281 LONG13390-01
    17•NUT,#5-40 HEX13414-01
    18•GAGE HEAD SUB-ASSEM12309-01
    19•SPRING RETAINING RING12322-02
    20•PLUNGER CONACLE SPRING12323-02
    21•CENTRALIZER PLUNGER12324-02
    22•MEASURE PLUNGER12325-01
    23•STOP PLUG12338-01
    24•COMPRESSION SPRING12339-01
    25•CENTRALIZER12340-01
    26•PLATE,COVER13426-01
    27•SCREW, #1-64 SLOT X .135 LONG13468-03
    28NUT,.375-40 HEX13453-03
    29EXTENSION ROD 8.000 - 9.50012371-01
    30EXTENSION ROD 9.500 - 11.00012372-01
    31EXTENSION ROD 11.000 - 12.50012373-01
    32DIAL IND, 84MA-161-712393-01
    33•CASE SUB-ASSEMBLY FOR 2 TO 3 GEARPT227001
    34•GUIDE09347-01
    35•SCREW, #1-64 SLOT X .154 LONGPT093482
    36•WSHR,.100X.187X.025PT093502
    37•SCREW, #3-56 SLOT X .556 LONGPT093522
    38•PIN, .042X.187PT093581
    39•WSHR,.157X.218X.078PT093591
    40•RACK, .5MM RANGE09490-01
    41•SPRING, .166X.186X.500X.010X6PT095881
    42•10mm PLASTIC STEM CAP26402-01
    43•BACK, FLAT STEEL #25PT06608J1
    44•CLAMP SCREW12289-01
    45•BEZEL CLAMP, PLASTIC23417-01
    46•HAND, #25PT083081
    47•SCREW, #4-48 SLOT X .231 LONGPT092841
    48•DIAL STAT. 84MA-161-725696-01
    49•DIAL, MOVABLE90697-01
    50•SCREW, #3-56 PHILLIPS X .190 LONGPT093074
    51•BEZEL & CRYSTALPT994191
    52••BEZEL IND., PLASTICPT234161
    53••CRYSTAL, #25PT066221
    54•CONTACT POINTPT072151
    55•HAND, #25 TELL TALEPT066611
    56•SPR WSHR,1.593X2.020X.006PT06673A1
    57•PIN, RACK GUIDE #25PT068481
    58•BRIDGE/PLATE ASSEM.26659-01
    59••BRIDGE SUB ASSEMBLY09400-01
    60•••BRIDGE #2509408-01
    61•••BEARING, JEWEL #25PT094221
    62•••BEARING,JEWELPT094213
    63•••PIN, .094X.30009425-02
    64••PLATE SUB ASSEMBLY09437-01
    65•••PLATE09389-01
    66•••BEARING,JEWELPT094214
    67•••PIN, .093X.11109431-02
    68••HAIRSPR GEAR ASSEM.PT092891
    69••SCREW, #3-56 PHILLIP X .263 LONGPT094244
    70••SCREW, #1-64 SLOT X .148 LONG23449-01
    71••POST, HAIRSPRING09418-01
    72••PINION, HANDPT089731
    73••GEAR, RACK ASSEMBLY11852-01
    74••GEAR, INTERMEDIATE ASSEM.PT092951
    75KEY, HEX 9/64"30854-01
    76PIN, RANGE EXT. ADJ.14387-01
    77WRENCH,RANGE EXT ADJ14388-01
    78CASE ONLY, WOOD84ZZ-71NOT SHOWN

3D CAD Files / Exploded Parts Diagram

    Login to see related product files. Or create an account.

Product Testimonials

    Write a product review

    California Proposition 65 Warning

      WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov