00040

84MAZ-181-6J Dial Bore Gages (127 - 203.2mm Range) 00040

Starrett 84 bore gages allow for bore measurements beyond the size range of our 82 Series. They are comparison gages and should be set with a master ring gage, gage blocks with parallel jaws, outside micrometers or vernier calipers. Ring gages are available by request, quoted by application. Good practice is to set the gage to zero, as near to the desired dimension as possible. 127-203.2mm Range 0.01mm Grad


Contact Starrett

Features

  • Can be easily held to inspect bores and hole sizes without removing the workpiece
  • An adjustable range screw and two centralizing plungers provide accurate, three-point contact for tool alignment in larger bores
  • All contacts and centralized plungers are of hardened tool steel for wear and spring-loaded for sensitivity
  • The housing and knurled handle are aluminum for light weight and good balance
  • Dial indicators have jewel bearings for sensitivity
  • Furnished in finished wood case
  • Bore depths are also available up to 12" (300mm) in 1" (25mm) increments on special order
  • Also available with carbide contacts or electronic indicators with output capability on special order

Specifications

  • Range (mm): 127 - 203.2mm
  • Graduations (mm): 0.01mm
  • Approximate Measuring Depth (mm): 150mm

Parts

    Member of Kit
    Item #DescriptionPart No.QtyInformation
    1SCREW, #8-32 SHCS X .375 LONG30970-02
    2HOUSING CLAMP12271-01
    3HOUSING12270-01
    4HANDLE12370-01
    5HANDLE CAP12272-01
    6BORE GAGE SUB-ASSEMBLY12377-01
    7•EXTENSION HOUSING ASSEMBLY12285-01
    8•EXTENSION PLUNGER12288-01
    9•RING, EXT RETAINING11445-01
    10•SPR WSHR, .190X.281X.00606822-01
    11•SPRING, .196X.238X1.0625X.021 X1113429-01
    12•TRANSFER BUSHING12328-01
    13•90 DEGREE TRANSFERNOT AVAILABLE1
    14•DOWEL PIN, 1.5MM X 8MM, HARDENED STEEL (ALLOY STEEL)12326-01
    15•SCREW, #5-40 SLOT X .438 LONG13470-03
    16•SCREW, #5-40 SET X .281 LONG13390-01
    17•NUT,#5-40 HEX13414-01
    18•GAGE HEAD SUB-ASSEM12308-01
    19•SPRING RETAINING RING12318-02
    20•PLUNGER CONACLE SPRING12319-02
    21•CENTRALIZER PLUNGER12320-02
    22•MEASURE PLUNGER12321-01
    23•STOP PLUG12335-01
    24•CENTRALIZER COMPRESSION SPRING12336-01
    25•CENTRALIZER12337-01
    26•PLATE,COVER13426-01
    27•SCREW, #1-64 SLOT X .135 LONG13468-03
    28NUT,.312-40 HEX13430-04
    29EXTENSION ROD 5.000 - 5.75012366-01
    30EXTENSION ROD 5.750 - 6.50012367-01
    31EXTENSION ROD 6.500 - 7.25012368-01
    32EXTENSION ROD 7.250 - 8.00012369-01
    33DIAL IND, 84MA-181-612392-01
    34•CASE SUB-ASSEMBLY FOR 2 TO 3 GEARPT227001
    35•STUD, TELLTALE19083-01
    36•HAND, #25PT083081
    37•STUD, CENTER19082-01
    38•BRIDGE/PLATE ASSEM26790-01
    39••BRIDGE SUB ASSEMBLYPT094101
    40•••BRIDGE #2509414-01
    41•••BEARING, JEWEL #25PT094221
    42•••BEARING,JEWELPT094212
    43•••PIN, .094X.30009425-02
    44••PLATE SUB ASSEMBLY09392-01
    45•••PLATE09396-01
    46•••BEARING,JEWELPT094213
    47••PINION, HANDPT089731
    48••SCREW, #3-56 PHILLIP X .263 LONGPT094244
    49••SCREW, #1-64 SLOT X .148 LONG23449-01
    50••POST, HAIRSPRING09418-01
    51••HAIRSPR GEAR ASSEM.27071-01
    52••GEAR, RACK ASSEMBLY11852-01
    53•SCREW, #3-56 SLOT X .556 LONGPT093522
    54•WSHR,.100X.187X.025PT093502
    55•BEZEL & CRYSTALPT994191
    56••BEZEL IND., PLASTICPT234161
    57••CRYSTAL, #25PT066221
    58•SPR WSHR,1.593X2.020X.006PT06673A1
    59•HAND, #25 TELL TALEPT066611
    60•DIAL STAT. 84MA-181-625695-01
    61•DIAL,MOV. BORE GAGE23516-01
    62•10mm PLASTIC STEM CAP26402-01
    63•SCREW, #4-48 SLOT X .231 LONGPT092841
    64•CLAMP SCREW12289-01
    65•BEZEL CLAMP, PLASTIC23417-01
    66•RACK, 2.5MM RANGE09489-01
    67•SPRING,.166X.186X1.156X.010X1 809591-01
    68•WSHR,.157X.218X.078PT093591
    69•PIN, .042X.187PT093581
    70•PIN, RACK GUIDE #25PT068481
    71•GUIDE09347-01
    72•SCREW, #1-64 SLOT X .154 LONGPT093482
    73•CONTACT POINTPT072151
    74•BACK, FLAT STEEL #25PT06608J1
    75•SCREW, #3-56 PHILLIPS X .190 LONGPT093074
    76KEY, HEX 9/64"30854-01
    77PIN, RANGE EXT. ADJ.14387-01
    78WRENCH,RANGE EXT ADJ14388-01
    79CASE ONLY, WOOD84ZZ-61NOT SHOWN

3D CAD Files / Exploded Parts Diagram

    Login to see related product files. Or create an account.

Product Testimonials

    Write a product review

    California Proposition 65 Warning

      WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov