F2715IQ Group 1 Electronic Indicator 72970

2700IQ Electronic Digital Indicators
Digital Indicator, AGD Group 1, SPC Output, 10mm/.4" Range, 0.02mm/0.01mm/0.002mm/0.001mm/.001"/.0005"/.0001"/.00005" Res.

The Starrett 2700 Electronic Indicator will make absolute, incremental and/or comparative measurements and implement all the features of 2700 series Indicators. System is suitable for any stand-alone gaging application. .400" (10mm) Range

Product Testimonials
California Prop 65

Contact Starrett


  • Rugged, sealed enclosures
  • Our most versatile line of electronic indicators
  • Available in two styles
  • Remote display and accompanying probe series
  • High Accuracy, capacitive scale design with an unsurpassed accuracy of two resolutions when measuring from a known standard
  • American designed and manufactured
  • All available resolutions can be utilized in the same indicator, provided they are coarser than the resolution of the purchased model
  • 4 resolutions and 2 measuring ranges available
  • Starrett can customize electronic indicators to meet your needs
  • Units can be designed with features such as: Special measuring ratios like 2:1 and 4:33
  • Rotating bezel
  • Output data can be used by a variety of peripherals for analysis, data collection and hard copy documentation
  • Output jack allows data transmission
  • Instant inch/mm conversion
  • Zero the tool at any position of the spindle
  • Hold button to freeze display: Displays and holds the reading after the measurement has been taken
  • Preset mode to install any reading at any point in the display. Reading is retained even if the indicator is turned off
  • Plus or minus travel direction
  • Auto Off: After 10 minutes of nonuse. When Auto Off is engaged, an hourglass figure appears at the left side of the display
  • T.I.R.: Displays the difference between the highest and lowest values reached


  • Made in America: Yes
  • Range (in): .400"
  • Range (mm): 10mm
  • Resolution (in): 001"/.0005"/.0001"/.00005"
  • Resolution (mm): 0.02mm/0.01mm/0.002m/0.001mm
  • SPC Output: Yes
  • Stem Diameter (in): .375"
  • Accuracy (in): ±.0001
  • Accuracy (mm): ±0.002mm


  • PT15878 (73287)
    PT15878 Center Lug Group 1 - 2700
  • PT15879 (73288)
    PT15879 Flat Group 1 - 2700
  • PT15880 (73289)
    PT15880 Offset Lug Group 1 - 2700
  • PT15881 (73290)
    PT15881 Adjustable Group 1 - 2700
  • PT15882 (73291)
    PT15882 Post Group 1 - 2700
  • PT15883 (73292)
    PT15883 Screw Bracket Group 1 - 2700

Product Testimonials

    Write a product review

    California Proposition 65 Warning

      WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov