B565H Brass Drive Pin Punch, 5/16

B565 Brass Drive Pin Punches and Sets
Brass Drive Pin Punch, 4"/100mm Length, 5/16"/8mm Punch Diameter

Our regular Starrett Drive Pin Punchs are made of hardened, tempered steel to with stand heavy duty work, but at times are too hard and can damage softer materials. The Starrett B565 brass punch is ideal for these applications as they are much softer than the steel version. The obvious disadvantage of brass punches is the same as their advantage -they are much softer than hardened steel. Obviously, the brass is less able to stand up to years of hard use. Ideally, it is good to have sets of both types and use the brass punches only when there is the possibility of damage to the work piece. Available in eight individual sizes from 1/16" to 5/16" and as a full set of eight in an attractive pouch. Brass Drive Pin Punch, 4" (100mm), 5/16" (8mm) Dia.

Contact Starrett


  • Knurled Grip for secure holding
  • Will not damage softer materials
  • Non-sparking
  • Punch diameter clearly marked on the head


  • Made in America: Yes
  • Length (in): 4"
  • Length (mm): 100mm
  • Punch Diameter (in): 5/16"
  • Punch Diameter (mm): 8mm
  • Material: Brass


3D CAD Files / Exploded Parts Diagram

    Login to see related product files. Or create an account.

Product Testimonials

    Write a product review

    California Proposition 65 Warning

      WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov