b'C ArBideA dVAnz TsarbideF eATures Carbide tipped teeth Triple chip tooth geometryC Aggressive Rake angleB eneFiTs General purpose cutting Ferrous and non-ferrous metals Reduced cutting time - Higher productivity Precise cuts producing excellent finish Excellent cost per cut for production cutting Good for less rigid saw machinesA PPliCATions High-alloy metals Aerospace alloys Stainless steel Nickel alloys Hard and abrasive materials For machines with hydraulic feed control Cast iron Brass, bronze, copperWidth x Thickness Width x Thicknessin mm Pitch/Rake Material No. in mm Pitch/Rake Material No.1/2 x .035 13 x 0.90 3/TC-P-T 92593 1-1/2 x .050 41 x 1.30 3/TC-P-T 925243/4 x .035 19 x 0.90 3-4/TC-P-T 92503 1.4-2/TC-P-T 925593/TC-P-T 92500 2 x .063 54 x 1.60 2-3/TC-P-T 925281 x .035 27 x 0.90 3-4/TC-P-T 92509 1.3/TC-P-T 925583/TC-P-T 92504 .9-1.1/TC-P-T 925601-1/4 x .042 34 x 1.10 2-3/TC-P-T 92515 2-5/8 x .063 67 x 1.60 1.4-2/TC-P-T 925613-4/TC-P-T 92517 2-3/TC-P-T 925301-1/4 x .050 34 x 1.30 2-3/TC-P-T 92522 1.4-2/TC-P-T 925633/TC-P-T 92512 3-1/8 x .063 80 x 1.60 2-3/TC-P-T 925321/TC-P-T 92526 1/TC-P-T 925311.4-2/TC-P-T 92521 P - Positive rake | TC - Triple chip | T - Trapezoid set1-1/2 x .050 41 x 1.30 2-3/TC-P-T 92516 Furnished in welded bands.3-4/TC-P-T 92569 Special products on request.1.3/TC-P-T 92519P - Positive rake | TC - Triple chip | T - Trapezoid setFurnished in welded bands.Special products on request.30'