ULC Series - "Ultra" Low Profile Sensors Model Number Load Capacity Safe Overload Full Scale Deflection Height1 Width Thread N KGF LBF % Full Scale mm inch mm inch mm inch mm ULC-1500 1500 150 337 150 0.05 0.002 63.5 2.5 104.8 4.13 M16 x 2-4H ULC-2500 2500 250 567 150 0.05 0.002 63.5 2.5 104.8 4.13 M16 x 2-4H ULC-5K 5000 500 1124 150 0.05 0.002 63.5 2.5 104.8 4.13 M16 x 2-4H ULC-10K 10,000 1000 2248 150 0.05 0.002 63.5 2.5 104.8 4.13 M16 x 2-4H ULC-25K 25,000 2500 5620 150 0.05 0.002 63.5 2.5 104.8 4.13 M16 x 2-4H ULC-50K 50,000 5000 11,250 150 0.05 0.002 63.5 2.5 104.8 4.13 M16 x 2-4H NOTES 1 Dimension includes the base adapter. ULC Series sensors are supplied with the base adapter standard. Load measurement accuracy is ±0.05% of reading down to 1/100 of load cell capacity. Display resolution is 10,000:1. Starrett recommends on-site verification of accuracy during installation. Sensor calibration should be performed at least annually. MLC Series - Low Profile Sensors Model Number Load Capacity Safe Overload Full Scale Deflection Height1 Width Thread N KGF LBF % Full Scale mm inch mm inch mm inch mm MLC-125 125 12.5 28 150 0.08 0.003 38.1 1.5 69.8 2.75 M6 x 1-6H MLC-250 250 25 56 150 0.08 0.003 38.1 1.5 69.8 2.75 M6 x 1-6H MLC-500 500 50 112 150 0.08 0.003 38.1 1.5 69.8 2.75 M6 x 1-6H MLC-1000 1000 100 225 150 0.08 0.003 38.1 1.5 69.8 2.75 M6 x 1-6H MLC-1500 1500 150 337 150 0.03 0.001 63.51 2.51 104.8 4.13 M16 x 2-4H MLC-2500 2500 250 562 150 0.03 0.001 63.51 2.51 104.8 4.13 M16 x 2-4H MLC-5K 5000 500 1124 150 0.03 0.001 63.51 2.51 104.8 4.13 M16 x 2-4H MLC-10K 10,000 1000 2248 150 0.03 0.001 63.51 2.51 104.8 4.13 M16 x 2-4H MLC-25K 25,000 2500 5620 150 0.05 0.002 63.51 2.51 104.8 4.13 M16 x 2-4H MLC-50K 50,000 5000 11,250 150 0.05 0.002 63.51 2.51 104.8 4.13 M16 x 2-4H NOTES 1 Dimension includes the base adapter. These MLC sensors are supplied with the base adapter standard. Base adapters are recommended for any MLC sensor. Load measurement accuracy is ±0.05% of reading down to 1/100 of load cell capacity. Display resolution is 10,000:1. Starrett recommends on-site verification of accuracy during installation. Sensor calibration should be performed at least annually. Starrett offers a full range of precision load cell sensors for material testing, force analysis and force measurement applications. Starrett load cells are compliant with IEEE 1451.4 and meet or exceed ASTM E4, BS 1610, ISO 7500-1 and EN 10002-2. Measurement accuracies of ±0.05% of reading down to 1/100 of sensor capacity may be achieved. Sensors are supplied with a NIST-traceable Certificate of Calibration. Sensors may be used on L3, L2 Plus, L2 and S2 Systems. ULC and MLC Load Cell Sensors Starrett ULC and MLC load cell sensors are full-bridge, temperature compensated,strain gage instruments designed and optimized for material testing applications. These low profile sensors feature high axial stiffness and minimal deflection at full capacity which leads to improved measurement accuracy. The ULC provides ultimate measurement performance and are supplied with a standard base plate adapter. Available in capacities from 1.5kN to 50kN. The MLC are general purpose sensors available in capacities from 125N to 50kN. Load Cell Sensors 36 L oad C ell S ensors