12 L oad C ell S ensors Load Cell Sensors Starrett offers a full range of precision load cell sensors for material testing, force analysis and force measurement applications. Starrett load cells are compliant with IEEE 1451.4 and meet or exceed ASTM E4, BS 1610, ISO 7500-1 and EN 10002-2. Measurement accuracies of ±0.05% of reading down to 1/100 of sensor capacity may be achieved.Sensors are supplied with a NIST-traceable Certificate of Calibration. BLC Load Cell Sensors Starrett BLC load cell sensors are full-bridge, temperature compensated, strain gage instruments designed and optimized for basic force testing applications.These S-beam sensors feature high axial stiffness and minimal deflection at full capacity which leads to improved measurement accuracy. The BLC sensors are general purpose sensors available in capacities from 2lbf to 500lbf (10 to 2500N). These sensors are used exclusively with L1 Systems. Services Calibra tion, Field Service, Factory Service Starrett can provide all levels of service for your material test and force measurement systems. We can supply a comprehensive range of calibration and verification services to ensure that your testing meets the requirements of international testing standards. Calibrations can be performed to ASTM E4 for load and ASTM E2658 for displacement or to equivalent standards from ISO, BS, DIN and more. Speed, stress and strain verifications can be performed on-site by technicians accredited to ISO 17025. Preventative maintenance programs, field and factory repair services are available to ensure that your systems perform to their published specifications. Starrett can provide factory services including load cell calibrations, test frame repair and reconditioning. All Starrett load cell sensors are supplied with a NIST- traceable Certificate of Calibration. Your Starrett representative can provide on-site training to your personnel to help ensure that your system operates to its published specification. Our training also provides your operators with the knowledge needed to perform your testing in a safe and efficient manner. Our objectives are to help you make your products better through improved resource utilization, increased throughput and optimized efficiency. BLC - Basic Force Measurement S-beam Sensors Model No. Load Capacity Safe Overload Full Scale Deflection Height Width Thread N KGF LBF % Full Scale in mm in mm in mm mm BLC-2 10 1 2 150 0.009 0.22 3.0 76.2 3.0 76.2 M6 x 1-6H BLC-5 20 2 5 150 0.008 0.21 3.0 76.2 3.0 76.2 M6 x 1-6H BLC-10 50 5 10 150 0.007 0.18 3.0 76.2 3.0 76.2 M6 x 1-6H BLC-20 100 10 20 150 0.007 0.18 2.0 50.8 2.0 50.8 M6 x 1-6H BLC-50 250 25 50 150 0.006 0.15 2.0 50.8 2.0 50.8 M6 x 1-6H BLC-100 500 50 110 150 0.003 0.08 2.0 50.8 2.0 50.8 M6 x 1-6H BLC-200 1000 100 225 150 0.003 0.08 2.0 50.8 2.0 50.8 M6 x 1-6H BLC-500 2500 250 550 150 0.005 0.13 2.0 50.8 2.0 50.8 M12 x 1.75-5H NOTES Load measurement accuracy is ±0.1% of load cell capacity. Display resolution is 10,000:1. Starrett recommends on-site verification of accuracy during installation. Sensor calibration should be performed at least annually.