Arbors and Accessories Debris Collector NO CLEAN UP, NO DRILL DAMAGE, NO DEBRIS SPREAD Fea tures • Bowl flexes with minimal pressure as the hole is sawn • Huge potential time saving - there is no need to mask at risk areas prior to sawing or clean up after sawing • Keeps dust and other debris out of the motor of the drill • Suitable for hole saws up to and including 4-3/4" (121mm) Cat. No. EDP Description DB2 01379 Debris Collector Steps to Use the Debris Collector STAGE ONE Pass the shank of the arbor through the hole at the bottom of the DB2 and attach to the drill in the normal way. Always ensure that the Debris Collector spins freely prior to use. STAGE TWO Site the saw for cutting the hole. The Debris Collector can be pulled down to provide a better view of the work area. STAGE THREE Drill the hole! STAGE FOUR All the dirt and debris from the cut hole is collected inside the Debris Collector! 30 H ole S aws