Gradua tions and Numbering Styles Short-Line Tapes Long-Line Tapes S1 REGULAR ENGLISH • Graduated in 1/16" on both edges • Graduated 1/32" for the first foot of 1/2" and 3/4" wide blades only • Numbered in consecutive inches to 1' and repeat on one edge and consecutive inches on the other edge • Blades have stud marks every 16" on English lines, and truss center marks every 19.2 inches on 1" wide English lines L1 ENGLISH • Graduated in 8ths and numbered one to twelve inches to each foot and repeat, with quick-reading figures L5-100 DIAMETER TAPE • One side is graduated in 8ths and numbered in feet and inches • The other side is graduated and numered each diameter inch • Graduated in 100ths of a diameter inch and numbered each one 10th L8 METRIC • Graduated in millimeters and numbered in consecutive centimeters to each meter and repeat L3 ENGLISH • Graduated in 16ths and numbered in consecutive inches S6 METRIC • Available in 13, 19, and 5mm widths • Graduated in millimeters and numbered in consecutive centimeters to the end of the tape line S9 ENGLISH/METRIC • Available in 1/2", 3/4", and 1" (13, 19, and 25mm) widths • Lower edge graduated in millimeters and numbered in consecutive centimeters to the end • Top edge graduated in 16ths of an inch and numered in consecutive inches and numbered at each foot S12 ENGLISH/METRIC • Available in 1/2", 3/4" and 1" (13, 19 and 25mm) widths • Lower edge graduated in millimeters and numbered in consecutive millimeters to each decimeter and repeat • Top edge graduated in 16ths of an inch and numbered in consecutive inches and numbered at each foot 52 M easuring T apes