Carbide Advanz™ MC7 Features • Exclusive Starrett tooth geometry • Carbide tipped • Progressively ground trapezoidal tooth design • Utilizes a progressive four tooth grind creating seven distinct chips • Positive rake angle • Sub micron carbide (HV1600) Benefits • Cutting ferrous metals • Higher productivity through reduced cutting time • Precision cuts - superb surface finish • Excellent "cost per cut" for production cutting • Exclusive Starrett edge preparation - minimizes micro chipping • Less wear compared to conventional triple chip MC7 (Seven Multiple Chips) Applications • Difficult to machine steels • Tool steels, heat-treated steels, stainless materials • Inconel, nickel alloys • Titanium Width x Thickness Pitch/Rake Material No. in mm 1-1/4 x .042 34 x 1.10 2-3/SC-P-T 92573 1-1/2 x .050 41 x 1.30 1.4-2/SC-P-T 92575 2-3/SC-P-T 92581 2 x .063 54 x 1.60 1.4-2/SC-P-T 92578 2-3/SC-P-T 92582 2-5/8 x .063 67 x 1.60 .9-1.1/SC-P-T 92583 1.4-2/SC-P-T 92584 3-1/8 X 0.63 80 X 1.60 .9-1.1/SC-P-T 92594 1.4-2/SC-P-T 92595 P - Positive rake | SC - Septuple chip | T - Trapezoid set Furnished in welded bands. Special products on request. AMP A v ailable with Technology 28 C arbide NEW!