Features • Carbide tipped teeth • Triple chip tooth geometry • Aggressive Rake angle Benefits • General purpose cutting • Ferrous and non-ferrous metals • Reduced cutting time - Higher productivity • Precise cuts producing excellent finish • Excellent “cost per cut” for production cutting • Good for less rigid saw machines Applications • High-alloy metals • Aerospace alloys • Stainless steel • Nickel alloys • Hard and abrasive materials • For machines with hydraulic feed control • Cast iron • Brass, bronze, copper Advanz™ TS Carbide Width x Thickness Pitch/Rake Material No. in mm 1/2 x .035 13 x 0.90 3/TC-P-T 92593 3/4 x .035 19 x 0.90 3-4/TC-P-T 92503 3/TC-P-T 92500 1 x .035 27 x 0.90 3-4/TC-P-T 92509 3/TC-P-T 92504 1-1/4 x .042 34 x 1.10 2-3/TC-P-T 92515 3-4/TC-P-T 92517 1-1/4 x .050 34 x 1.30 2-3/TC-P-T 92522 3/TC-P-T 92512 1-1/2 x .050 41 x 1.30 1/TC-P-T 92526 1.4-2/TC-P-T 92521 2-3/TC-P-T 92516 3-4/TC-P-T 92569 1.3/TC-P-T 92519 P - Positive rake | TC - Triple chip | T - Trapezoid set Furnished in welded bands. Special products on request. Width x Thickness Pitch/Rake Material No. in mm 1-1/2 x .050 41 x 1.30 3/TC-P-T 92524 2 x .063 54 x 1.60 1.4-2/TC-P-T 92559 2-3/TC-P-T 92528 1.3/TC-P-T 92558 2-5/8 x .063 67 x 1.60 .9-1.1/TC-P-T 92560 1.4-2/TC-P-T 92561 2-3/TC-P-T 92530 3-1/8 x .063 80 x 1.60 1.4-2/TC-P-T 92563 2-3/TC-P-T 92532 1/TC-P-T 92531 P - Positive rake | TC - Triple chip | T - Trapezoid set Furnished in welded bands. Special products on request. 30 C arbide