b'Arbors and Accessories S H awS oleA1 A2 A4 A10 A17-38E KA7-NH iGHs pEEDs tEEl a rBora DaptorWITH PILOT DRILLAllows use of hole saws up to 6" (152mm).Arbor suitable for use with Fast Cut (FCH), Carbide Tipped (CT) andCat. No. EDP DescriptionDiamond (D) hole saws (Diamond hole saw applications will usuallyKA12 01611 Adaptor screws on to arbors with a 1/2"- 20 screw thread and allows use of hole saws up to 152mm (6")require an arbor with a carbide tipped pilot drill). *CAT. NO. WITH K: Clam pack (plastic clamshell packaging)Fits Hole Saw DiameterShank SizeCat. No. EDP in mm in mmA155141 11/32 Hex 8.75 Hex l oCKiNGa rBorA4 55144 9/16 - 1-3/16 14 - 30 1/4 Hex 6.5 HexA2 - Quick-Hitch 55142 7/16 Hex 11 Hex Fits Hole Saw DiameterShank SizeA10 - Quick-Hitch 56615 1-1/4 - 8-9/32 32 - 210 11/32 Hex 8.75 Hex Cat. No. EDP in mm in mmA17-38E** 11937 1-1/4 - 6-1/4 32 - 159 11/32 Hex 8.75 HexXA17-38 Carbide Tipped 64199 1-1/2 - 8-9/32 38 - 210** With Extended Length HSS Pilot DrillE xtENDEDl ENGtH E jECtors priNGArbor suitable for use with Deep Cut (DCH) and Multi-Purpose (MPH)Spring for fitting over pilot drill. Spring pushes core out of hole saw hole saws. after completion of the cut.Fits Hole Saw Diameter Shank Size Cat. No. EDP DescriptionCat. No. EDP in mm in mm KA7-N* 11557 Ejector SpringA1-E 11925 9/16 - 1-3/16 14 - 30 11/32 Hex 8.75 Hex *CAT. NO. WITH K: Clam pack (plastic clamshell packaging)A4-E 11931 1/4 Hex 1/4 HexA2-E - Quick-Hitch 11928 1-1/4 - 8-9/32 32 - 210 7/16 Hex 11 HexA10-E - Quick-Hitch 11934 11/32 Hex 8.75 HexW itHC arBiDED rill a rBorE xtENsioNFits Hole Saw Diameter Shank Size Cat. No. EDP For Support Fits Chuck SizeCat. No. EDP in mm in mm KA5-N* 11560 A2, A2E 1/2" - 13mmXA1 56758 9/16 - 1-3/16 14 - 30 11/32 Hex 8.75 Hex KA15-N* 11559 A1, A1E, A10, A10E, A17-38E 3/8" - 9.5mmXA2 - Quick-Hitch 56759 1-1/4 - 8-9/32 32 - 210 7/16 Hex 11 Hex *CAT. NO. WITH K: Clam pack (plastic clamshell packaging)XA10 - Quick-Hitch 56763 11/32 Hex 8.75 Hexstarrett.com 23'