b'w edGe -a ctionF ixtures243STEEL, PHOSPHATE FINISH For general-purpose tensile testing applications Has a closed back so sample is loaded from front side only FA W ixtures ction edge Spring-loaded, lever operation Jaw faces must be ordered separately Operating Temperatures 32 to 266F (0 to 130C)Wedge-Action FixturesLoad Capacity Sample Width (Max) Sample Thickness (Max) Weight (each) Clevis TypeModel No. N KGF LBF Jaw Face in mm in mm lbs kgs mm SupplyWEDGE-243S-1 20K 2,000 4,400 No Jaws Jaw Dependent Jaw Dependent 8.4 3.8 15.9 2WEDGE-243S-50 50K 5,000 11,000 No Jaws Jaw Dependent Jaw Dependent 15.0 6.8 31.8 2d iMensions89 659817.59875 50WEDGE-243S-135243 J aws etsSTEEL, HARDENED SERRATED JAW Supplied four (4) jaws per setPyramids 1.2 x 45 Operating Temperatures 32 to 266F (0 to 130C)Hardened steel 58HRC Nickel-platedJaw SetsJaw Opening (Max) Clamping SurfaceModel No. Jaw Face in mm in mmJAW243-PY13 Serrated 0.5 13 1.97 x 1.4 50 x 35 V-NOTCH JAWJAW243-PY16 Serrated 0.6 16 1.97 x 1.4 50 x 35For round samplesJAW243-V3 V-Notch 0.01-0.5 3-13 1.97 height 50mm heightJAW243-V4 V-Notch 0.15-0.6 4-16 1.97 height 50mm height1.2mm tooth pitchJAW243-V10 V-Notch 0.39-0.8 10-20 1.97 height 50mm heightHardened steel 58HRC Nickel-platedstarrett.com 105'