b'F orceG aGea daPtersThese adapters are supplied standard with Starrett force gages.They may also be used with thread adapters and various load cell sensors available from Starrett.Gage adapters include flats, notches, chisels, points and rods.F Lata daPtersdapters aGe orce For general-purpose compression testing applications Threaded attachment Operating Temperatures 32 to 158F (0 to 70C) aG FFlat AdaptersLoad Capacity Thread Size Diameter (Flat) LengthModel No. N KGF LBF Metric Material in mm in mm Supply ODMLX-FLAT-A 20 2 5 M6 x 1-6H Aluminum 0.5 12 0.5 12 1 1/2"MLX-FLAT-S 1,500 150 330 M6 x 1-6H Stainless 0.5 12 0.5 12 1 1/2"MLX-FLAT-L 2,500 250 550 M10 x 1.5-6H Stainless 0.75 19 0.875 22 1 3/4"MLX-FLAT-XL 5,000 500 1,100 M12 x 1.75-6H Stainless 0.75 19 0.875 22 1 3/4"n otcHa daPters For general-purpose compression testing applications Threaded attachment, 90 notch Operating Temperatures 32 to 158F (0 to 70C)V-Notch AdaptersLoad Capacity Thread Size Diameter LengthModel No. N KGF LBF Metric Material in mm in mm Supply ODMLX-NOTCH-A 20 2 5 M6 x 1-6H Aluminum 0.375 9.5 0.625 15.9 1 3/8"MLX-NOTCH-S 1,500 150 330 M6 x 1-6H Stainless 0.375 9.5 0.625 15.9 1 3/8"MLX-NOTCH-L 2,500 250 550 M10 x 1.5-6H Stainless 0.625 15.9 1.125 28.6 1 5/8"MLX-NOTCH-XL 5,000 500 1,100 M12 x 1.75-6H Stainless 0.625 15.9 1.125 28.6 1 5/8"c HiseLa daPters For general-purpose compression testing applications Threaded attachment, 60 chisel point Operating Temperatures 32 to 158F (0 to 70C)Chisel AdaptersLoad Capacity Thread Size Diameter LengthModel No. N KGF LBF Metric Material in mm in mm Supply ODMLX-CHISEL-A 20 2 5 M6 x 1-6H Aluminum 0.375 9.5 0.625 15.9 1 0.475MLX-CHISEL-S 1,500 150 330 M6 x 1-6H Stainless 0.375 9.5 0.625 15.9 1 3/8"MLX-CHISEL-L 2,500 250 550 M10 x 1.5-6H Stainless 0.625 15.9 1.125 28.6 1 5/8"MLX-CHISEL-XL 5,000 500 1,100 M12 x 1.75-6H Stainless 0.625 15.9 1.125 28.6 1 5/8"P ointa daPters For general-purpose compression testing applications Threaded attachment Operating Temperatures 32 to 158F (0 to 70C)Point AdaptersLoad Capacity Thread Size Diameter LengthModel No. N KGF LBF Metric Material in mm in mm Supply ODMLX-POINT-A 20 2 5 M6 x 1-6H Aluminum 0.375 9.5 0.625 15.9 1 3/8"MLX-POINT-S 1,500 150 330 M6 x 1-6H Stainless 0.375 9.5 0.625 15.9 1 3/8"MLX-POINT-L 2,500 250 550 M10 x 1.5-6H Stainless 0.625 15.9 1.125 28.6 1 5/8"MLX-POINT-XL 5,000 500 1,100 M12 x 1.75-6H Stainless 0.625 15.9 1.125 28.6 1 5/8"178'