b'c Levisa daPtersClevis adapters are used to secure most of the testing fixtures available for your Starrett systems.Clevis adapters are available in two diameters: 15.9mm and 31.8mm.The 15.9mm adapters are the most commonly used and are designed for load capacities below 20kN.Loads over 20kN will typlically use the 31.8mm clevis.Special clevis adapters are available for use with Starrett force gages.These adapters thread on to the force gage shaft and allow clevis-style test fixtures to be utilized.dApters levisc Levisa daPters et Includes clevis, locking rings and grip pin A CThreaded attachment Operating Temperatures 32 to 158F (0 to 70C)Clevis SetsLoad Capacity Thread Size Diameter (Clevis) LengthModel No. N KGF LBF Metric Material in mm in mm SupplySPK-CLEVIS-A 50 5 10 M6 x 1-6H Aluminum 0.626 15.9 1.693 43 1SPK-CLEVIS-S 1,500 150 330 M6 x 1-6H Stainless 0.626 15.9 2.205 56 1SPK-CLEVIS-L 2,500 250 562 M10 x 1.5-6H Stainless 0.626 15.9 2.362 60 1SPK-CLEVIS-XL 5,000 500 1,124 M12 x 1.75-6H Stainless 0.626 15.9 2.362 60 1KIT-CLEVIS31-S-M16 50K 5,000 11,124 M16 x 2-4H Stainless 1.25 31.7 3.5 89 1F orceG aGea daPters et Includes clevis, locking rings and grip pin For DFC or DFG digital force gage Operating Temperatures 32 to 158F (0 to 70C) Female threadForce Gage SetsLoad Capacity Thread Size Diameter (clevis)Model No. N KGF LBF Metric Material in mm SupplySPK-FG-CLEVIS-A 20 2 5 M6 X 1-6H Aluminum 0.63 15.9 1SPK-FG-CLEVIS-S 1,500 150 330 M6 X 1-6H Stainless Steel 0.63 15.9 1SPK-FG-CLEVIS-L 2,500 250 550 M10 X 1.5-6H Stainless Steel 0.63 15.9 1M aLec Levisa daPter Clevis only (no rings or pins) Threaded attachment Operating Temperatures 32 to 158F (0 to 70C)Clevis AdaptersLoad Capacity Thread Size Diameter (Clevis) LengthModel No. N KGF LBF Metric Material in mm in mm SupplyMLX-CLEVIS-A-M6M 50 5 10 M6 x 1-6H Aluminum 0.626 15.9 1.693 43 1MLX-CLEVIS-S-M6M 1,500 150 330 M6 x 1-6H Stainless 0.626 15.9 2.205 56 1MLX-CLEVIS-S-M10M 2,500 250 562 M10 x 1.5-6H Stainless 0.626 15.9 2.362 60 1MLX-CLEVIS-S-M12M 5,000 500 1,124 M12 x 1.75-6H Stainless 0.626 15.9 2.362 60 1174'