b's cissorF ixturesScissor test fixtures secure the sample with a pinching force.The rate of clamping force changes depending on the jaw opening width. These are ideal for high-volume testing applications and are self-aligning and self-tightening. o PerationScissor test fixtures are self-tightening and self-aligning. The initial gripping force is supplied by spring tension.The clamping force to tensile force changes according to the jaw opening width.The larger the width, the more clamping force is applied.ixtureS ciSSort estinGs tandardsThere are a variety of testing standards that may be used with scissor test fixtures. Contact your Starrett representative for more information about your specific testingF S method and the available test fixtures.11STEEL, STAINLESS For general-purpose tensile testing applications Spring tension tightening Jaw faces must be ordered separately Operating Temperatures -94 to 266F (-70 to 130C)11 J aws etsSTEEL, HARDENED Supplied two (2) jaws per set Operating Temperatures -94 to 266F (-70 to 130C)Scissor Fixtures - SCISSOR-11SS-5-1Load Capacity Sample Width (Max) Sample Thickness (Max) Weight (each) Clevis TypeModel No. N KGF LBF in mm in mm lbs kgs mm SupplySCISSOR-11SS-5-1 5,000 500 1,100 1.97 50 0.75 19 2.6 1.2 15.9 2Jaw Sets - SCISSOR-11SS-5-1Jaw Opening (max) Clamping SurfaceModel No. Jaw Face in mm in mm SupplyJAW11-5-B50 Smooth 0 - 0.75 0 - 19 0 - 0.79 20 x 50 4JAW11-5-PY50 Serrated 0 - 0.75 0 - 19 0 - 0.79 20 x 50 4Scissor Fixtures - SCISSOR-11-20A-1Load Capacity Sample Width (Max) Sample Thickness (Max) Weight (each) Clevis TypeModel No. N KGF LBF in mm in mm lbs kgs mm SupplySCISSOR-11-20A-1 20K 2,000 4,400 1.97 50 Jaw Dependent 4.4 2.0 15.9 2Jaw Sets - SCISSOR-11-20A-1Jaw Opening (max) Clamping SurfaceModel No. Jaw Face in mm in mm SupplyJAW11-20-B50 Smooth 0 - 1 0 - 25 0.98 x 1.97 25 x 50 4JAW11-20-B100 Smooth 0 - 1 0 - 25 0.98 x 3.94 25 x 100 4JAW11-20-PY50 Serrated 0 - 1 0 - 25 0.98 x 1.97 25 x 50 4JAW11-20-PY100 Serrated 0 - 1 0 - 25 0.98 x 3.94 25 x 100 4JAW11-20-RD50 Serrated 0 - 0.79 0- 20 0.98x 2.05 25x 52 4JAW11-20-VEE4 Vee-Type 0.16 - 0.24 4 - 16Clamp Height: 0.98 Clamp Height: 25 4JAW11-20-WV50 Wave 0 - 1 0 - 25 0.98 x 1.97 25 x 50 4JAW11-20-WV100 Wave 0 - 1 0 - 25 0.98 x 3.94 25 x 100 4Scissor Fixtures - SCISSOR-11-50S-1Load Capacity Sample Width (Max) Sample Thickness (Max) Weight (each) Clevis TypeModel No. N KGF LBF in mm in mm lbs kgs mm SupplySCISSOR-11-50S-1 50K 5,000 11,000 3.93 100 Jaw Dependent 20.1 9.1 15.9 2Jaw Sets - SCISSOR-11-50S-1Jaw Opening (max) Clamping SurfaceModel No. Jaw Face in mm in mm SupplyJAW11-50-PY Serrated 0 - 1.89 0 - 48 1.96 - 3.94 50 x 100 4JAW11-50-V10 Vee-Type 0 - 1.89 0 - 48 0.39 - 1.8910 - 484156'