b'c abLesListed below are the cables used with all Starrett force gages and Lx systems.Systems using L1, L2, S2, L2 Plus and L3 software interface and communicate with their associated computer using USB communications.The DFG and DFC force gages us a USB cable for charging the internal lithium ion battery. The USB cable may also be used with communicating to a computer.When the DFC force gage is used as a controller with the FMM test frames, communications between the DFC and the FMM using the L1-CONTROL cable.usb c abLes Interface cable between the Starrett test frame and the personal computer operating L1, L2, S2, L2 Plus and L3 software. Interface cable between Starrett force gage and a personal computer. Cable used for charging the Starrett force gage internal battery.ablesUSB CablesInterface Between Connector LengthModel No. Devices Type A B in mm SupplyC L1-USB DFC and DFG Force Gage USB 2.0 USB-A USB-B Micro 36 915 112405-0 AIO PC to FMM, FMS, MMS, FMD and MMD Test Frames USB 2.0 USB-A USB-B 72 1,830 1Shown: DFC force gage shown with L1-USB cable. Cable is supplied standard.L1-controL c abLe Interface cable between the DFC force gage and the FMM test frame. Bi-directional control Charges the DFC force gage when connected to a powered FMM test frame.D-Sub Style CablesInterface Between Connector LengthModel No. Devices Type A B in mm SupplyL1-CONTROL DFC Gage to FMM Test Frame D-sub 9 Pin Female 9 Pin Male 74 1,880 19 Pin Micro D-Sub Female (C1) 9 Pin D-Sub Male (C2)1 74in (1880mm)L1-rs232 c abLe 1 Interface cable between the FMM test frame and a device using RS-232D-Sub Style CablesInterface Between Connector LengthModel No. Devices Type A B in mm SupplyL1-RS232 FMM Test Frame to RS-232 Device D-sub 9 Pin Female 9 Pin Female 74 1,880 19 Pin Micro D-Sub Female (C1) 9 Pin D-Sub Male (C2)1 174in (1880mm)182'