1101, 1101M Dial Indica tor Diameter Gages 12-60"/300-1500MM These gages allow for measurement beyond the size range of our 1102 models. Each gage adjusts a full 6" or 150mm. The contact carriers are vertically adjustable to handle various work depth. Special contacts are available. This tool has dowel (line) contacts at one end of the gage feet, and a button (point) contact gage at the other end of the feet. These can be reversed as needed and the gaging depth can be set within a range of 2-3/4" or 70mm. This gage should be checked against our 1126 Master for a precise reference standard during production gaging (See the following pages). Indica tor Diameter Gages B H G F D A E C MIN. MAX. GAGE REST ADJ. PT01761 BUTTON TYPE REST 3.00" (75) 5/8" (16) 3/4" (19) PLANE X WILL CLEAR 11/16" (17) ADJUSTABLE GAGING EXTERNAL ADJUSTABLE GAGING INTERNAL 3/8" (9.5) MAX. ABOVE PLANE X 2-3/8" (60) MAX. BELOW PLANE X DOWEL TYPE REST PT06632-7 1101 and 1101M Dial Indicator Diameter Gages Length Inch Reading - .0005" Graduations MillimeterReading-.01mmGraduations InchReading-.0001"Graduations MillimeterReading-.002mmGraduations in mm Cat. No. EDP Cat. No. EDP Cat. No. EDP Cat. No. EDP 12-18 300-450 1101-18 53144 1101M-450 65015 1101-18-1 69005 1101M-450-2 69021 18-24 450-600 1101-24 53146 1101M-600 65016 1101-24-1 69006 1101M-600-2 69022 24-30 600-750 1101-30 53148 1101M-750 65017 1101-30-1 69007 1101M-750-2 69023 30-36 750-900 1101-36 53150 1101M-900 65018 1101-36-1 69008 1101M-900-2 69024 36-42 900-1050 1101-42 53152 1101M-1050 65019 1101-42-1 69009 1101M-1050-2 69025 42-48 1050-1200 1101-48 53154 1101M-1200 65021 1101-48-1 69010 1101M-1200-2 69026 48-54 1200-1350 1101-54 53156 1101M-1350 65022 1101-54-1 69011 1101M-1350-2 69027 54-60 1350-1500 1101-60 53158 1101M-1500 65023 1101-60-1 69012 1101M-1500-2 69028 GagingContactRange: ±.050" ±1.3mm ±.050" ±1.3mm Sent without case unless otherwise ordered. To order case, specify the Catalog and "ZZ" (For example: 1101ZZ-18). 1101 and 1101M Dial Indicator Diameter Gages Photo Key Description A Dial Indicator Fine-Adjusting Screw B Beam – Rectangular Box Section C Contact for Added Applications D I.D.-O.D. Preload Reversing Mechanism Lever E Combination Dowel/Button Rest Feet F Sensitive Contact G Reference Contact H Mounting Plate with Combination Dowel and Button Rest Feet 1101-18-1 199 starrett.com I ndica tors and G ages