380 Steel Straight Edges 385 Steel Straight Edges with Bevel Edge 12-72"/300-1800MM 387 Steel Straight Edges with Bevel and Gradua ted Edge 12-48"/300-1200MM These straight edges are precision ground and nicely finished to rigid Starrett standards. They are unexcelled for drawing or scribing straight lines and checking surfaces for straightness. Their thickness and design permit them to retain shape and accuracy, but still be portable and easy to handle. The 380 Straight Edge is not beveled or graduated. The 385 straight edge is beveled one edge, but not graduated. The 387 straight edge has one edge that is both beveled and graduated in 32nds of an inch. The 380 and 385 Straight Edges in sizes 36" and longer are marked with arrows at two suspension points. If the straight edges are brought to the work and used on edge, they should be suspended at these two points to minimize deflection. Most jobs involve the use of straight edges in the flat position – and it is in this position that we check most stringently. 386 Draftsmen's Steel Straight Edges with Bevel Edge 12-72"/300-1800MM These straight edges are thinner than our 385 straight edge (3/32" or 2.4mm) making them easier for draftsmen to use. Available in lengths up to 72" long. They have an attractive nickel plated finish, are beveled on one edge, and have a convenient hang-hole on one end. Steel Straight Edges Steel Straight Edges 380 385 with Bevel 387 with Bevel, Graduations Length Width x Thickness Cat. No. EDP Cat. No. EDP Cat. No. EDP in mm in mm 380-12 51438 385-12 51455 387-12 51468 12 300 1-13/32 x 11/64 36 x 4.4 380-18 51439 385-18 51456 387-18 51469 18 450 1-13/32 x 11/64 36 x 4.4 380-24 51440 385-24 51457 387-24 51470 24 600 1-13/32 x 11/64 36 x 4.4 380-24 W/SLC* 66895 380-36 51441 385-36 51458 387-36 51471 36 900 2-13/32 x 7/32 60 x 5.5 380-48 51442 385-48 51459 387-48 51472 48 1200 2-13/32 x 7/32 60 x 5.5 380-72 51444 385-72 51461 72 1800 3-5/32 x 9/32 80 x 7 * Includes redemption card for Standard Letter of Certification (SLC). 386 Draftsmen's Steel Straight Edges with bevel edge Cat. No. EDP Length Width x Thickness in mm in mm 386-12 51462 12 300 1-9/16 x 3/32 40 x 2.4 386-24 51463 24 600 1-9/16 x 3/32 40 x 2.4 386-36 51464 36 900 1-9/16"x 3/32 40 x 2.4 386-48 51465 48 1200 2-1/8 x 3/32 54 x 2.4 386-72 51467 72 1800 2-5/8 x 7/64 66 x 2.8 380 385-12 387-12 386-12 302 P recision R ules , S traight E dges , P arallels