Load Cell Sensors Offering a full range of precision load cell sensors for material testing, force analysis and force measurement applications. Starrett load cells are compliant with IEEE 1451.4 and meet or exceed ASTM E4, BS 1610, ISO 7500-1 and EN 10002-2. Measurement accuracies of ±0.05% of reading down to 1/100 of sensor capacity may be achieved. Sensors are supplied with a NIST-traceable Certificate of Calibration. Starrett recommends on-site verification of accuracy during installation. Sensor calibration should be performed at least annually. MLC Load Cell Sensors The MLC Load Cell Sensor is a full-bridge, temperature compensated, strain gage instruments designed and optimized for material testing applications. These low profile sensors feature high axial stiffness and minimal deflection at full capacity which leads to improved measurement accuracy. The MLC Sensors are general purpose sensors available in capacities from 125N to 50kN. MLC Low Profile Sensors Model No. Load Capacity Safe Overload Full Scale Deflection Height1 Width Thread N KGF LBF % Full Scale in mm in mm in mm mm MLC-125 125 13 28 150 0.003 0.08 1.5 38.1 2.75 69.8 M6 x 1-6H MLC-250 250 25 56 150 0.003 0.08 1.5 38.1 2.75 69.8 M6 x 1-6H MLC-500 500 50 112 150 0.003 0.08 1.5 38.1 2.75 69.8 M6 x 1-6H MLC-1000 1,000 100 225 150 0.003 0.08 1.5 38.1 2.75 69.8 M6 x 1-6H MLC-1500 1,500 150 337 150 0.001 0.03 2.51 63.51 4.13 104.8 M16 x 2-4H MLC-2500 2,500 250 562 150 0.001 0.03 2.51 63.51 4.13 104.8 M16 x 2-4H MLC-5K 5,000 500 1,124 150 0.001 0.03 2.51 63.51 4.13 104.8 M16 x 2-4H MLC-10K 10,000 1,000 2,248 150 0.001 0.03 2.51 63.51 4.13 104.8 M16 x 2-4H MLC-25K 25,000 2,500 5,620 150 0.002 0.05 2.51 63.51 4.13 104.8 M16 x 2-4H MLC-50K 50,000 5,000 11,250 150 0.002 0.05 2.51 63.51 4.13 104.8 M16 x 2-4H NOTES 1. Dimension includes the base adapter. These MLC sensors are supplied with the base adapter standard. Base adapters are recommended for any MLC sensor. Load measurement accuracy is ±0.05% of reading down to 1/100 of load cell capacity. Display resolution is 10,000:1. 2. For FMS, MMS, FMD or MMD frames. MLC-500 BLC Load Cell Sensors BLC load cell sensors are full-bridge,temperature compensated,strain gage instruments designed and optimized for basic force testing applications. These S-beam sensors feature high axial stiffness and minimal deflection at full capacity which leads to improved measurement accuracy. The BLC sensors are general purpose sensors available in capacities from 2lbf to 500lbf (10 to 2500N).These sensors are used exclusively with L1 Systems. BLC - Basic Force Measurement S-beam Sensors Model Number Load Capacity Safe Overload Full Scale Deflection Height Width Thread N KGF LBF % Full Scale in mm in mm in mm mm BLC-2 10 1 2 150 0.009 0.22 3.0 76.2 3.0 76.2 M6 x 1-6H BLC-5 20 2 5 150 0.008 0.21 3.0 76.2 3.0 76.2 M6 x 1-6H BLC-10 50 5 10 150 0.007 0.18 3.0 76.2 3.0 76.2 M6 x 1-6H BLC-20 100 10 20 150 0.007 0.18 2.0 50.8 2.0 50.8 M6 x 1-6H BLC-50 250 25 50 150 0.006 0.15 2.0 50.8 2.0 50.8 M6 x 1-6H BLC-100 500 50 110 150 0.003 0.08 2.0 50.8 2.0 50.8 M6 x 1-6H BLC-200 1000 100 225 150 0.003 0.08 2.0 50.8 2.0 50.8 M6 x 1-6H BLC-500 2500 250 550 150 0.005 0.13 2.0 50.8 2.0 50.8 M12 x 1.75-5H NOTES 1. Load measurement accuracy is ±0.1% of load cell capacity. Display resolution is 10,000:1. 2. For FMM frames. 512 M a terial T esting / F orce M easurement