262 Micrometer Heads with Non-Rot a ting Spindles 0-1"/0-25MM Because the spindle does not rotate, this tool is useful in driving positioning tables directly without an intermediate connecting device. It is also useful in gaging jobs where scratches on the work surface cannot be tolerated, or where there is risk of distortion when spindle meets work ­ – as in measuring soft or elastic materials. Spindle wear is also reduced, since there is no rotational friction when its face contacts the work. • Ring-type lock nut for quick and sure locking at any setting • Available with or without the combination ratchet and speeder for uniform pressure and quicker adjustment Micrometer Heads 262 Micrometer Heads (0-1" Range) Cat. No. EDP Graduation 262L 55945 .001" 262RL 55946 262M Micrometer Heads (0-25mm Range) Cat. No. EDP Graduation 262ML* 64347 0.01mm 262MRL* 65051 0-25mm models specify clamping diameter 12mm or 12.7mm.12.7mm sent unless otherwise ordered. 262L ( ) 7/8" (22) .235" (5.97) 5/8" (16) 2-1/2" (63.5) 5" (127) WHEN SET ON ZERO 13/32" (10) 1-1/4" (32) 3/4" (19) .4999" (12.697) .4994" (12.685) 12.000 or 12.700 (+.000) (-.007) 262L (0-1") and 262ML (0-25mm) dimensions ( ) .235" (5.97) 1-1/4" (32) 3/4" (19) 2-1/2" (63.5) 5" (127) WHEN SET ON ZERO 7/8" (22) .4999" (12.697) .4994" (12.685) 5/8" (16) 13/32" (10) 12.000 or 12.700 (+.000) (-.007) 262RL (0-1") and 262MRL (0-25mm) dimensions 64 M icrometers